📚 Quick Links: 📐 Class 10 Maths (14 Ch) | 🔬 Class 10 Science (13 Ch) | 📐 Class 9 Maths (14 Ch) →
🔬 NEP 2020 • 2026–27 CBSE RATIONALISED SYLLABUS

NCERT Class 9 Science Complete Solutions (Chapters 1 to 12)

100% Free, Ad-Free, and Step-by-Step textbook solutions for Class 9 Physics, Chemistry, and Biology. Structured in official CBSE step-marking format with high-definition labeled diagrams, flowcharts, balanced reactions, and numerics.

📊 14+ Labeled Vector Diagrams & Charts
🧪 Balanced Reactions
⚡ Step-by-Step Physics Numerics
🧬 Biology Cytology & Histology
🚫 Zero Ads or Distractions
👨‍🏫 Mentored personally by Rohit Sir
🔍
Chapter 1 Chemistry 26 Complete Solutions (17 In-Text + 9 Exercises)

1. Matter in Our Surroundings

Physical nature of matter, states of matter (Solid, Liquid, Gas), interconversion of states, latent heat of fusion & vaporisation, sublimation, and evaporation cooling.

📘 Chapter 1: Matter in Our Surroundings Quick Concept & Formula Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Interconversion of States of Matter (Phase Changes)
SOLID LIQUID GAS Fusion / Melting (+ Heat) Solidification (- Heat) Vaporisation (+ Heat) Condensation (- Heat) Sublimation (+ Heat) Deposition (- Heat)
NCERT Fig. 1.9: Interconversion of the three states of matter via temperature & pressure changes.
Definition of Matter
Anything that occupies space and has mass is called matter. Ancient Indian philosophers classified matter into Panch Tatva (Air, Earth, Fire, Sky, Water).
Characteristics of Particles
1. Have spaces between them. 2. Are in continuous motion (possess kinetic energy directly proportional to temperature). 3. Attract each other with inter-particle forces.
Three States of Matter
Solids: Fixed shape & volume, negligible compressibility, high density, rigid. Liquids: No fixed shape, fixed volume, moderate compressibility, fluidity. Gases: No fixed shape or volume, highly compressible, low density, high fluidity.
Temperature Conversion
Kelvin (K) is the SI unit of temperature. T(K) = T(°C) + 273.15 | T(°C) = T(K) - 273.15.
Latent Heat
Latent Heat of Fusion: Heat required to change 1 kg of solid into liquid at atmospheric pressure at its melting point. Latent Heat of Vaporisation: Heat required to change 1 kg of liquid into gas at its boiling point.
Sublimation & Deposition
Sublimation: Direct transition from solid to gas without entering liquid state (e.g., Camphor, Ammonium chloride, Naphthalene). Deposition: Direct gas to solid.
🎯 Rohit Sir's Concept Breakdown: Matter ke particles ke beech inter-particle force aur space state decide karte hain. Jab temperature badhta hai, kinetic energy badhti hai aur particles tezi se move karte hain. Evaporation ek surface phenomenon hai jo boiling point se kam temperature par bhi hota hai aur cooling cause karta hai.
⚠️ Common Exam Trap Radar: Latent heat ke dauraan temperature constant rehta hai kyunki supplied heat intermolecular bonds todne me consume hoti hai! Steam at 100°C gives more severe burns than boiling water at 100°C because steam contains extra latent heat of vaporisation (2.26 × 10⁶ J/kg)!
⚡ Topper's Quick Calculation / Memory Trick: Celsius se Kelvin me jaane ke liye +273 karo; Kelvin se Celsius me jaane ke liye -273 karo. Cooling by evaporation: Earthen pot pores, cotton clothes in summer, acetone on palm - sab me evaporation absorption of heat principle lagta hai!
📖
Part 1: NCERT In-Text Questions (Pages 3, 6, 9, 10)
Official textbook questions found between concepts inside Chapter 1 — 17 In-Text Questions with Step Marks Format
📄 NCERT Page 3 In-Text Questions (Q1 to Q4)
📌 In-Text (Page 3) ✓ 100/100 Step Marks Format

Which of the following are matter? Chair, air, love, smell, hate, almonds, thought, cold, cold drink, smell of perfume.

✓ Step-by-Step Textbook Solution

Matter is defined as anything that occupies space (has volume) and possesses mass.

1.
Matter: Chair, air, almonds, cold drink, smell of perfume (since smell of perfume is caused by tiny volatile particles of matter suspended in air).
2.
Not Matter (feelings/sensations/thoughts): Love, hate, cold, thought, smell (by itself as an abstract sense of perception).
📌 In-Text (Page 3) ✓ 100/100 Step Marks Format

Give reasons for the following observation: The smell of hot sizzling food reaches you several metres away, but to get the smell from cold food you have to go close.

✓ Step-by-Step Textbook Solution
1.
Kinetic energy of particles is directly proportional to absolute temperature (KE ∝ T).
2.
In hot sizzling food, particles of aroma have high temperature, hence they possess high kinetic energy and move at high speeds.
3.
This leads to a very high rate of diffusion of aroma particles into the surrounding air molecules.
4.
In cold food, the kinetic energy of particles is low, resulting in a negligible rate of diffusion. Therefore, to smell cold food, one has to go close.
📌 In-Text (Page 3) ✓ 100/100 Step Marks Format

A diver is able to cut through water in a swimming pool. Which property of matter does this observation show?

✓ Step-by-Step Textbook Solution

This observation shows the following fundamental properties of matter:

1.
The particles of liquid (water) have intermolecular spaces between them.
2.
The intermolecular forces of attraction between particles of liquid water are relatively weak compared to solids, allowing them to be separated easily by the diver.
📌 In-Text (Page 3) ✓ 100/100 Step Marks Format

What are the characteristics of the particles of matter?

✓ Step-by-Step Textbook Solution

The four fundamental characteristics of particles of matter are:

1.
Particles of matter have spaces between them (Intermolecular spaces).
2.
Particles of matter are in continuous motion (Brownian motion & kinetic energy).
3.
Particles of matter attract each other (Intermolecular forces of cohesion).
4.
Particles of matter are extremely tiny beyond our imagination.
📄 NCERT Page 6 In-Text Questions (Q1 to Q4)
📌 In-Text (Page 6) ✓ 100/100 Step Marks Format

The mass per unit volume of a substance is called density (density = mass/volume). Arrange the following in order of increasing density: air, exhaust from chimneys, honey, water, chalk, cotton, iron.

✓ Step-by-Step Textbook Solution

Density is directly related to the mass of particles and how closely packed they are in a given volume.

1.
Air (least dense, light gas mixture).
2.
Exhaust from chimneys (air mixed with smoke and heavy particulate matter).
3.
Cotton (solid, but has large air pockets trapped inside).
4.
Water (liquid with moderate density, 1000 kg/m³).
5.
Honey (viscous liquid with higher density than water).
6.
Chalk (porous solid, higher density than liquids).
7.
Iron (densest solid among given, tightly packed heavy metal lattice).
📌 In-Text (Page 6) ✓ 100/100 Step Marks Format

(a) Tabulate the differences in the characteristics of states of matter. (b) Comment upon: rigidity, compressibility, fluidity, filling a gas container, shape, kinetic energy and density.

✓ Step-by-Step Textbook Solution

(a) Comparison of States of Matter:

•
Shape: Solid = Fixed shape | Liquid = Takes shape of container | Gas = No fixed shape.
•
Volume: Solid = Fixed volume | Liquid = Fixed volume | Gas = Takes volume of container.
•
Compressibility: Solid = Negligible | Liquid = Very low | Gas = Highly compressible.
•
Intermolecular Space: Solid = Minimum | Liquid = Moderate | Gas = Maximum.
•
Intermolecular Force: Solid = Maximum | Liquid = Moderate | Gas = Minimum.
•
Fluidity: Solid = Cannot flow (Rigid) | Liquid = Flows easily | Gas = Flows in all directions.

(b) Definitions:

1.
Rigidity: Tendency of a substance to maintain its shape under external stress (Highest in solids).
2.
Compressibility: Capacity of substance to decrease in volume when external pressure is applied (Highest in gases).
3.
Fluidity: Ability of a substance to flow freely (Present in liquids and gases, termed fluids).
4.
Filling a gas container: Due to negligible intermolecular force and high kinetic energy, gas particles move randomly in all directions and fill the entire container.
5.
Shape: Definite geometric boundary maintained by strong intermolecular forces.
6.
Kinetic Energy: Energy possessed due to motion. Order: Solid < Liquid < Gas.
7.
Density: Mass per unit volume (d = m/V). Order: Gas < Liquid < Solid (with ice as exception).
📌 In-Text (Page 6) ✓ 100/100 Step Marks Format

Give reasons: (a) A gas fills completely the vessel in which it is kept. (b) A gas exerts pressure on the walls of the container. (c) A wooden table should be called a solid. (d) We can easily move our hand in air but to do the same through a solid block of wood we need a karate expert.

✓ Step-by-Step Textbook Solution

(a) Gas particles have extremely weak intermolecular forces of attraction and very high kinetic energy. Hence, they move independently in all directions and occupy all available space in the vessel.

(b) In the gaseous state, particles move randomly at high speeds and collide continuously with each other and with the container walls. The force exerted by these particle collisions per unit area on the container walls constitutes gas pressure (P = F/A).

(c) A wooden table has a fixed shape, definite volume, distinct boundaries, negligible compressibility, and cannot flow. Thus, it satisfies all properties of a solid.

(d) Air particles have negligible forces of attraction and large spaces between them, allowing our hand to easily displace them. In contrast, particles in a block of wood are tightly bound by extremely strong intermolecular cohesive forces, requiring a massive localized force (like a karate strike) to separate them.

📌 In-Text (Page 6) ✓ 100/100 Step Marks Format

Liquids generally have lower density as compared to solids. But you must have observed that ice floats on water. Find out why.

✓ Step-by-Step Textbook Solution
1.
Ice is the solid state of water, but when water freezes into ice below 4°C, it forms a 3-dimensional cage-like crystal lattice held by hydrogen bonding.
2.
This cage structure encloses large empty spaces (vacant voids) between water molecules.
3.
Consequently, for a given mass, the volume of ice is greater than that of liquid water (V_ice > V_water).
4.
Since density = Mass / Volume, the density of ice (approx 0.917 g/cm³) is lower than the density of liquid water (1.00 g/cm³ at 4°C).
5.
Therefore, ice floats on water.
📄 NCERT Page 9 In-Text Questions (Q1 to Q4)
📌 In-Text (Page 9) ✓ 100/100 Step Marks Format

Convert the following temperatures to Celsius scale: (a) 300 K (b) 573 K

✓ Step-by-Step Textbook Solution
Formula: Temperature in °C = Temperature in K - 273

(a) 300 K:

T(°C) = 300 - 273 = 27°C

(b) 573 K:

T(°C) = 573 - 273 = 300°C

📌 In-Text (Page 9) ✓ 100/100 Step Marks Format

What is the physical state of water at: (a) 250°C (b) 100°C?

✓ Step-by-Step Textbook Solution

(a) At 250°C: Water exists purely in the gaseous state (Steam / Water Vapour), because 250°C is far above its boiling point (100°C).

(b) At 100°C: Water exists in both liquid and gaseous states in equilibrium, because 100°C is the boiling point where liquid water is actively absorbing latent heat of vaporisation to convert into steam.

📌 In-Text (Page 9) ✓ 100/100 Step Marks Format

For any substance, why does the temperature remain constant during the change of state?

✓ Step-by-Step Textbook Solution
📊 Interconversion of States of Matter (Phase Changes)
SOLID LIQUID GAS Fusion / Melting (+ Heat) Solidification (- Heat) Vaporisation (+ Heat) Condensation (- Heat) Sublimation (+ Heat) Deposition (- Heat)
NCERT Fig. 1.9: Interconversion of the three states of matter via temperature & pressure changes.
1.
During a change of state (melting or boiling), heat energy is continuously supplied to the substance.
2.
However, this supplied heat energy is utilized to overcome the intermolecular forces of attraction holding the particles together, rather than increasing their kinetic energy.
3.
Since temperature is directly proportional to average kinetic energy of particles, and kinetic energy does not increase during this transition, the temperature remains strictly constant.
4.
This hidden heat is known as Latent Heat (Latent Heat of Fusion or Vaporisation).
📌 In-Text (Page 9) ✓ 100/100 Step Marks Format

Suggest a method to liquefy atmospheric gases.

✓ Step-by-Step Textbook Solution

Atmospheric gases can be liquefied by:

1.
Applying high pressure (which compresses particles closer together, reducing intermolecular space).
2.
Lowering the temperature (which extracts kinetic energy, slowing down particles and enabling intermolecular attractive forces to bind them into a liquid).
📄 NCERT Page 10 In-Text Questions (Q1 to Q5)
📌 In-Text (Page 10) ✓ 100/100 Step Marks Format

Why does a desert cooler cool better on a hot dry day?

✓ Step-by-Step Textbook Solution
1.
A desert cooler works on the principle of cooling caused by evaporation of water.
2.
On a hot dry day, the temperature is high and the humidity (moisture content in air) is very low.
3.
High temperature and low humidity both significantly increase the rate of evaporation.
4.
As water evaporates rapidly, it absorbs large amounts of heat energy from the surrounding air, making the air noticeably cooler.
📌 In-Text (Page 10) ✓ 100/100 Step Marks Format

How does the water kept in an earthen pot (matka) become cool during summer?

✓ Step-by-Step Textbook Solution
1.
An earthen pot (matka) has thousands of microscopic pores on its surface walls.
2.
Water continuously oozes out through these tiny pores to the outer surface of the pot.
3.
This surface water evaporates into the dry summer air, absorbing the required latent heat of vaporisation from the remaining water and the earthen pot itself.
4.
As a result, the heat energy of the remaining water decreases, cooling it down.
📌 In-Text (Page 10) ✓ 100/100 Step Marks Format

Why does our palm feel cold when we put some acetone or petrol or perfume on it?

✓ Step-by-Step Textbook Solution
1.
Acetone, petrol, and perfume are highly volatile liquids with low boiling points.
2.
When placed on our palm, their particles absorb heat energy (latent heat of vaporisation) directly from our skin to evaporate quickly.
3.
Because our skin loses heat energy to the evaporating molecules, our sensory nerve endings detect a cooling sensation, making the palm feel cold.
📌 In-Text (Page 10) ✓ 100/100 Step Marks Format

Why are we able to sip hot tea or milk faster from a saucer rather than a cup?

✓ Step-by-Step Textbook Solution
1.
Evaporation is a surface phenomenon; the rate of evaporation is directly proportional to surface area.
2.
A saucer provides a much larger surface area than a narrow cup.
3.
Because of the larger exposed surface area, hot tea evaporates much faster in a saucer, losing latent heat of vaporisation quickly and cooling down rapidly.
4.
Hence, we can sip it comfortably and faster from a saucer.
📌 In-Text (Page 10) ✓ 100/100 Step Marks Format

What type of clothes should we wear in summer?

✓ Step-by-Step Textbook Solution
1.
We should wear light-coloured cotton clothes in summer.
2.
Cotton is an excellent absorber of water/sweat. During summer, our body perspires to regulate temperature.
3.
Cotton absorbs this sweat and exposes it to the atmosphere for easy evaporation.
4.
As the sweat evaporates, it absorbs latent heat of vaporisation from our body surface, keeping us cool.
5.
Furthermore, light colours reflect heat radiation, keeping the body cooler.
📝
Part 2: Official NCERT Chapter-End Exercises (Questions 1 to 9)
Standard textbook exercise at the end of Chapter 1 (Page 12) — Primary source for CBSE School Homework & Board Exams
📝 NCERT Exercise (Q1) ✓ 100/100 Step Marks Format

Convert the following temperatures to the Celsius scale: (a) 293 K (b) 470 K

✓ Step-by-Step Textbook Solution

Formula: Temperature in Celsius (\(^\circ ext{C}\)) is calculated by subtracting \(273\) from the temperature in Kelvin (\( ext{K}\)):

Temperature in \(^\circ ext{C} = ext{Temperature in K} - 273\)
(a) For 293 K:
1.
\(T_{^\circ ext{C}} = 293 - 273 = 20^\circ ext{C}\)
(b) For 470 K:
2.
\(T_{^\circ ext{C}} = 470 - 273 = 197^\circ ext{C}\)
Final Answer:
(a) \(293 ext{ K} = \mathbf{20^\circ ext{C}}\)
(b) \(470 ext{ K} = \mathbf{197^\circ ext{C}}\)
📝 NCERT Exercise (Q2) ✓ 100/100 Step Marks Format

Convert the following temperatures to the Kelvin scale: (a) 25°C (b) 373°C

✓ Step-by-Step Textbook Solution

Formula: Temperature in Kelvin (\( ext{K}\)) is obtained by adding \(273\) to the temperature in Celsius (\(^\circ ext{C}\)):

Temperature in \( ext{K} = ext{Temperature in }^\circ ext{C} + 273\)
(a) For 25°C:
1.
\(T_{ ext{K}} = 25 + 273 = 298 ext{ K}\)
(b) For 373°C:
2.
\(T_{ ext{K}} = 373 + 273 = 646 ext{ K}\)
Final Answer:
(a) \(25^\circ ext{C} = \mathbf{298 ext{ K}}\)
(b) \(373^\circ ext{C} = \mathbf{646 ext{ K}}\)
📝 NCERT Exercise (Q3) ✓ 100/100 Step Marks Format

Give reason for the following observations: (a) Naphthalene balls disappear with time without leaving any solid. (b) We can get the smell of perfume sitting several metres away.

✓ Step-by-Step Textbook Solution
(a) Naphthalene balls disappearing completely:
1.
Naphthalene is a substance that undergoes sublimation at ambient room temperature (the direct change of state from solid to gas without melting into liquid).
2.
The solid naphthalene particles continuously sublime into volatile vapours that mix into the atmosphere, leaving behind absolutely no solid residue over time.
(b) Getting perfume smell several metres away:
1.
Perfume contains volatile aroma compounds that quickly vaporise into tiny gaseous particles.
2.
Gaseous particles possess high kinetic energy and large intermolecular spaces, which allows them to move randomly at tremendous velocities.
3.
Due to the rapid phenomenon of diffusion (intermixing of particles of two different states on their own), the fragrance molecules disperse swiftly throughout the room and reach our nose several metres away.
📝 NCERT Exercise (Q4) ✓ 100/100 Step Marks Format

Arrange the following substances in increasing order of forces of attraction between the particles—water, sugar, oxygen.

✓ Step-by-Step Textbook Solution

The magnitude of intermolecular forces of attraction between particles is determined by their physical states of matter:

Order of Intermolecular Attraction: \( ext{Gas} < ext{Liquid} < ext{Solid}\)
1.
Oxygen (\( ext{O}_2\)): It is a gas, so its particles possess the maximum intermolecular space and negligible/weakest forces of attraction.
2.
Water (\( ext{H}_2 ext{O}\)): It is a liquid, so it possesses intermediate intermolecular forces of attraction (stronger than gas, weaker than solid).
3.
Sugar (\( ext{C}_{12} ext{H}_{22} ext{O}_{11}\)): It is a crystalline solid, so its particles are bound by strong intermolecular cohesive forces in a fixed lattice.
Increasing Order:
\[\mathbf{ ext{Oxygen} < ext{Water} < ext{Sugar}}\]
📝 NCERT Exercise (Q5) ✓ 100/100 Step Marks Format

What is the physical state of water at— (a) 25°C (b) 0°C (c) 100°C?

✓ Step-by-Step Textbook Solution
(a) At 25°C:
1.
Water exists strictly in the liquid state. Since 25°C is standard room temperature (between its melting point 0°C and boiling point 100°C), water flows and possesses a fixed volume without a fixed shape.
(b) At 0°C:
2.
0°C is the melting point of ice as well as the freezing point of water. Therefore, both solid (ice) and liquid (water) coexist in equilibrium at 0°C due to the absorption or release of latent heat of fusion.
(c) At 100°C:
3.
100°C is the boiling point of water. Therefore, both liquid (boiling water) and gas (steam / water vapour) coexist in equilibrium at 100°C due to the continuous absorption of latent heat of vaporisation.
Summary:
(a) At \(25^\circ ext{C}\): Liquid
(b) At \(0^\circ ext{C}\): Solid (Ice) & Liquid (Water) in equilibrium
(c) At \(100^\circ ext{C}\): Liquid & Gas (Steam) in equilibrium
📝 NCERT Exercise (Q6) ✓ 100/100 Step Marks Format

Give two reasons to justify— (a) Water at room temperature is a liquid. (b) An iron almirah is a solid at room temperature.

✓ Step-by-Step Textbook Solution
(a) Justification for Water being a Liquid at Room Temperature:
1.
Fixed Volume but No Fixed Shape: Water at room temperature has a definite volume, but it does not have a rigid shape and takes the shape of the container into which it is poured.
2.
Fluidity: Due to moderate intermolecular forces of attraction and inter-particle spaces, water particles can slide over one another, enabling it to flow freely.
(b) Justification for an Iron Almirah being a Solid at Room Temperature:
1.
Definite Shape and Definite Volume: An iron almirah has a definite geometric shape, fixed volume, and distinct boundaries that do not deform under standard conditions.
2.
Rigidity and Incompressibility: The iron particles are held together by extremely strong metallic forces with negligible intermolecular space; thus it is rigid, cannot be compressed, and cannot flow.
📝 NCERT Exercise (Q7) ✓ 100/100 Step Marks Format

Why is ice at 273 K more effective in cooling than water at the same temperature (273 K)?

✓ Step-by-Step Textbook Solution
1.
Both ice and water are at 273 K (0°C).
2.
However, for 1 kg of ice at 273 K to convert into water at 273 K, it must absorb 3.34 × 10⁵ J of latent heat of fusion from its surroundings.
3.
Liquid water at 273 K already possesses this latent heat energy.
4.
Therefore, ice at 273 K absorbs substantially more heat energy (an extra 334 kJ/kg) from the substance being cooled compared to water at 273 K.
5.
Hence, ice produces a far superior cooling effect.
📝 NCERT Exercise (Q8) ✓ 100/100 Step Marks Format

What produces more severe burns, boiling water or steam at 100°C?

✓ Step-by-Step Textbook Solution
1.
Steam at 100°C produces much more severe burns than boiling water at 100°C.
2.
Reason: When steam condenses into boiling water on our skin, it releases an extra 2.26 × 10⁶ Joules of heat per kilogram (Latent Heat of Vaporisation).
3.
Thus, particles in steam carry significantly more thermal energy than particles in liquid boiling water at the exact same temperature (373 K).
4.
This massive extra energy transfer causes deeper tissue damage and more severe burns.
📝 NCERT Exercise (Q9) ✓ 100/100 Step Marks Format

Name A, B, C, D, E and F in the following diagram showing change in its state:

✓ Step-by-Step Textbook Solution
SOLID LIQUID GAS A B C D E F

Identification of processes A, B, C, D, E, and F:

A
Melting / Fusion: Conversion of Solid into Liquid by heating (absorbing latent heat of fusion).
B
Vaporisation / Boiling: Conversion of Liquid into Gas by heating (absorbing latent heat of vaporisation).
C
Condensation: Conversion of Gas into Liquid by cooling (releasing heat).
D
Solidification / Freezing: Conversion of Liquid into Solid by cooling.
E
Sublimation: Direct phase transition from Solid to Gas without passing through the liquid state (upon heating).
F
Deposition: Direct phase transition from Gas to Solid without passing through the liquid state (upon cooling).
Final Answer:
A = Fusion (Melting)  |  B = Vaporisation  |  C = Condensation
D = Solidification (Freezing)  |  E = Sublimation  |  F = Deposition
Chapter 2 Chemistry 10 Complete Solutions

2. Is Matter Around Us Pure?

Classification of matter into mixtures and pure substances, solutions, suspensions, colloids, Tyndall effect, concentration calculations, physical vs chemical changes, elements, and compounds.

📘 Chapter 2: Pure Substances & Mixtures Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Classification of Matter Flowchart
MATTER Pure Substances Mixtures (Impure) Elements Cannot be broken down e.g., Cu, O₂, Fe, Au Compounds Fixed proportion by mass e.g., H₂O, NaCl, CH₄ Homogeneous Uniform composition e.g., Sugar in water, Air Heterogeneous Non-uniform composition e.g., Sand+salt, Milk, Fog
NCERT Fig. 2.2: Systematic taxonomic breakdown of pure substances vs chemical mixtures.
Pure Substance vs Mixture
Pure Substance: Made of only one type of particle with fixed composition and distinct chemical properties (Elements & Compounds). Mixture: Contains two or more substances physically mixed in any ratio.
Types of Solutions
True Solution: Homogeneous mixture (particle size < 1 nm), stable, passes through filter paper, no Tyndall effect. Suspension: Heterogeneous (particle size > 100 nm), unstable, settles down, scatters light. Colloid: Heterogeneous looking homogeneous (particle size 1-100 nm), stable, shows Tyndall effect.
Concentration of Solution
Mass by Mass % = (Mass of Solute / Mass of Solution) × 100 | Mass by Volume % = (Mass of Solute / Volume of Solution) × 100.
Solution Components
Solute: Substance dissolved in lesser quantity. Solvent: Medium in which solute dissolves (greater quantity). Solution = Solute + Solvent.
Tyndall Effect
Scattering of a visible beam of light by colloidal particles suspended in a medium. Examples: Light beam through dense forest canopy, sunbeam in dusty room, milk in water.
Elements vs Compounds
Element: Basic form of matter that cannot be broken down by chemical reactions (Metals, Non-metals, Metalloids). Compound: Substance composed of two or more elements chemically combined in a fixed proportion by mass.
🎯 Rohit Sir's Concept Breakdown: True solution me particles itne chote hote hain ki light ko scatter nahi kar sakte. Colloidal particles light ko scatter karte hain (Tyndall effect). Mass percentage nikalte waqt denominator me hamesha 'Mass of Solution' (Solute + Solvent) rakha jata hai, sirf solvent ka mass nahi!
⚠️ Common Exam Trap Radar: Numerical trap: Agar question me '36 g of salt dissolved in 100 g of water' diya ho, to solution ka mass 136 g hoga, 100 g nahi! Concentration = (36 / 136) × 100 = 26.47%!
⚡ Topper's Quick Calculation / Memory Trick: Colloid components: Jo dissolve ho raha hai wo 'Dispersed Phase' hai, aur jisme dissolve ho raha hai wo 'Dispersion Medium' hai (jaise Fog me dispersed phase liquid water hai aur dispersion medium gas air hai)!
📌 In-Text (Page 15) ✓ 100/100 Step Marks Format

What is meant by a substance?

✓ Step-by-Step Textbook Solution
1.
In scientific terms, a substance is a pure form of matter that cannot be separated into other kinds of matter by any physical process.
2.
It has a uniform chemical composition and constant physical and chemical properties throughout (e.g., pure water, sodium chloride, gold, carbon dioxide).
📌 In-Text (Page 15) ✓ 100/100 Step Marks Format

List the points of differences between homogeneous and heterogeneous mixtures.

✓ Step-by-Step Textbook Solution
📊 Classification of Matter Flowchart
MATTER Pure Substances Mixtures (Impure) Elements Cannot be broken down e.g., Cu, O₂, Fe, Au Compounds Fixed proportion by mass e.g., H₂O, NaCl, CH₄ Homogeneous Uniform composition e.g., Sugar in water, Air Heterogeneous Non-uniform composition e.g., Sand+salt, Milk, Fog
NCERT Fig. 2.2: Systematic taxonomic breakdown of pure substances vs chemical mixtures.
1.
Uniformity of Composition:
•
Homogeneous: Has uniform composition throughout.
•
Heterogeneous: Has non-uniform composition throughout.
2.
Visibility of Boundaries:
•
Homogeneous: No visible boundaries of separation between constituents.
•
Heterogeneous: Visible boundaries of separation exist between components.
3.
Particle Size:
•
Homogeneous: Particles are sub-microscopic (< 1 nm) and invisible.
•
Heterogeneous: Particles are larger and can often be seen with naked eye or microscope.
4.
Examples:
•
Homogeneous: Salt dissolved in water, sugar solution, air, brass (alloys).
•
Heterogeneous: Sand in water, oil in water, chalk powder in water, iron filings and sulphur powder.
📌 In-Text (Page 18) ✓ 100/100 Step Marks Format

Differentiate between homogeneous and heterogeneous mixtures with examples.

✓ Step-by-Step Textbook Solution
•
Homogeneous Mixture: Components are thoroughly mixed at the molecular level, creating a single uniform phase. Composition and properties are identical in every sample taken. Example: Sugar syrup, clean air, alloys like bronze.
•
Heterogeneous Mixture: Components remain physically separate into two or more distinct phases. Composition varies from point to point. Example: Muddy water, concrete, salad, milk-and-cereal mixture.
📌 In-Text (Page 18) ✓ 100/100 Step Marks Format

How are sol, solution and suspension different from each other?

✓ Step-by-Step Textbook Solution

Comparison of Solution, Sol (Colloid), and Suspension:

1.
Particle Size:
•
True Solution: < 1 nm (10⁻⁹ m).
•
Sol (Colloid): 1 nm to 100 nm.
•
Suspension: > 100 nm.
2.
Appearance & Homogeneity:
•
True Solution: Clear, transparent, truly homogeneous.
•
Sol (Colloid): Translucent, heterogeneous (appears homogeneous).
•
Suspension: Opaque, distinctly heterogeneous.
3.
Stability:
•
True Solution: Highly stable; particles never settle down.
•
Sol (Colloid): Stable; particles do not settle upon standing.
•
Suspension: Unstable; particles settle down under gravity upon standing.
4.
Filterability:
•
True Solution: Passes through standard filter paper and parchment membrane.
•
Sol (Colloid): Passes through filter paper, but retained by ultra-filter/semipermeable membrane.
•
Suspension: Retained on normal filter paper.
5.
Tyndall Effect:
•
True Solution: Does not scatter light (No Tyndall effect).
•
Sol (Colloid): Scatters light beam vigorously (Shows Tyndall effect).
•
Suspension: Scatters light when particles are suspended, but effect ceases once particles settle.
📌 In-Text (Page 18 - Numerical) ✓ 100/100 Step Marks Format

To make a saturated solution, 36 g of sodium chloride is dissolved in 100 g of water at 293 K. Find its concentration at this temperature.

✓ Step-by-Step Textbook Solution
Given:
•
Mass of Solute (NaCl) = 36 g
•
Mass of Solvent (Water) = 100 g
Formula:
•
Mass of Solution = Mass of Solute + Mass of Solvent

Mass of Solution = 36 g + 100 g = 136 g

•
Concentration (Mass by mass percentage) = (Mass of Solute / Mass of Solution) × 100
Calculation:

Concentration = (36 / 136) × 100

Concentration = (9 / 34) × 100 = 900 / 34 ≈ 26.47%

✅ Final Answer / Conclusion: The concentration of the saturated sodium chloride solution is 26.47% (w/w).
📌 In-Text (Page 24) ✓ 100/100 Step Marks Format

Classify the following as chemical or physical changes: • Cutting of trees • Melting of butter in a pan • Rusting of almirah • Boiling of water to form steam • Passing of electric current through water and water breaking into hydrogen and oxygen gases • Dissolving common salt in water • Making a fruit salad with raw fruits • Burning of paper and wood

✓ Step-by-Step Textbook Solution
1.
Physical Changes (no new substance formed, reversible/chemical identity preserved):
•
Cutting of trees (changes shape and size, but chemical composition of wood remains unchanged).
•
Melting of butter in a pan (state change from solid to liquid, reversible).
•
Boiling of water to form steam (interconversion of state H₂O(l) → H₂O(g)).
•
Dissolving common salt in water (can be recovered by physical evaporation, NaCl remains NaCl).
•
Making a fruit salad with raw fruits (physical slicing, no new chemical compound).
2.
Chemical Changes (new chemical substances formed with new properties, irreversible):
•
Rusting of almirah (Iron reacts with atmospheric oxygen and moisture to form hydrated iron(III) oxide Fe₂O₃·xH₂O).
•
Passing of electric current through water to form hydrogen and oxygen (Electrolysis: 2H₂O → 2H₂ + O₂, chemical bond cleavage).
•
Burning of paper and wood (Combustion producing carbon dioxide, ash, and water vapour).
📌 In-Text (Page 24) ✓ 100/100 Step Marks Format

Try segregating the things around you as pure substances or mixtures.

✓ Step-by-Step Textbook Solution
1.
Pure Substances (Elements or Compounds):
•
Distilled water (H₂O), Iron nail (Fe), Copper wire (Cu), Table salt (NaCl), Cane sugar (C₁₂H₂₂O₁₁), Oxygen gas (O₂), Carbon dioxide (CO₂), Diamond/Graphite (C).
2.
Mixtures:
•
Air (N₂, O₂, Ar, CO₂), Tap water (water with dissolved minerals), Milk (emulsion of fat and protein in water), Soil, Petrol/Diesel, Steel/Brass (alloys), Soft drinks, Tea.
📌 Exercises (Q1) ✓ 100/100 Step Marks Format

Which separation techniques will you apply for the separation of the following? (a) Sodium chloride from its solution in water. (b) Ammonium chloride from a mixture containing sodium chloride and ammonium chloride. (c) Small pieces of metal in the engine oil of a car. (d) Different pigments from an extract of flower petals. (e) Butter from curd. (f) Oil from water. (g) Tea leaves from tea. (h) Iron pins from sand. (i) Wheat grains from husk. (j) Fine mud particles suspended in water.

✓ Step-by-Step Textbook Solution

(a) Evaporation / Crystallisation (Water vaporises leaving crystalline NaCl behind).

(b) Sublimation (Ammonium chloride sublimes directly into vapour upon heating and condenses on cold funnel walls, while NaCl remains behind).

(c) Filtration (Engine oil passes through the filter, solid metal shavings are retained).

(d) Chromatography (Paper chromatography separates pigments based on differential solubility in mobile phase).

(e) Centrifugation (Churning curd causes denser liquid whey to settle down while lighter fat/butter globules float to top).

(f) Separating Funnel (Immiscible liquids separate into two distinct layers based on density).

(g) Filtration (Using a strainer).

(h) Magnetic Separation (Using a magnet to attract magnetic iron pins).

(i) Winnowing (Blowing air carries lighter husk away, heavier wheat grains fall vertically).

(j) Sedimentation and Decantation followed by Filtration (or using Alum for loading).

📌 Exercises (Q2 - Numerical) ✓ 100/100 Step Marks Format

A solution contains 40 g of common salt in 320 g of water. Calculate the concentration in terms of mass by mass percentage of the solution.

✓ Step-by-Step Textbook Solution
Given:
•
Mass of Solute (common salt) = 40 g
•
Mass of Solvent (water) = 320 g
Formula:
•
Mass of Solution = Mass of Solute + Mass of Solvent

Mass of Solution = 40 g + 320 g = 360 g

•
Mass percentage of solution = (Mass of Solute / Mass of Solution) × 100
Calculation:

Mass % = (40 / 360) × 100

Mass % = (1 / 9) × 100 = 11.11%

✅ Final Answer / Conclusion: The concentration of the solution is 11.11% (w/w).
📌 Exercises (Q10) ✓ 100/100 Step Marks Format

Classify each of the following as a chemical or physical change: (a) Growth of a plant (b) Rusting of iron (c) Mixing of iron filings and sand (d) Cooking of food (e) Digestion of food (f) Freezing of water (g) Burning of a candle

✓ Step-by-Step Textbook Solution

(a) Growth of a plant: Chemical change (Irreversible biological cell division and synthesis of complex organic polymers like cellulose and proteins from water and carbon dioxide).

(b) Rusting of iron: Chemical change (Oxidation reaction forming hydrated iron(III) oxide Fe₂O₃·xH₂O).

(c) Mixing of iron filings and sand: Physical change (Physical mixture; can be separated simply using a magnet).

(d) Cooking of food: Chemical change (Thermal breakdown of starch, denaturation of proteins; irreversible).

(e) Digestion of food: Chemical change (Enzymatic hydrolysis breaking complex carbohydrates, fats, and proteins into glucose, fatty acids, and amino acids).

(f) Freezing of water: Physical change (Liquid water to ice H₂O(l) → H₂O(s); easily reversed by heating).

(g) Burning of a candle: Both Physical and Chemical change (Melting of candle wax is physical; combustion of wax vapour with oxygen producing CO₂ and H₂O is chemical).

Chapter 3 Chemistry 10 Complete Solutions

3. Atoms and Molecules

Laws of chemical combination (Mass conservation & Constant proportions), Dalton's atomic theory, atomic mass unit (u), IUPAC symbols, molecules, ions, criss-cross chemical formula writing, and molecular mass calculation.

📘 Chapter 3: Atoms and Molecules Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Law of Constant Proportions & Atomic Composition
Law of Conservation of Mass Total Mass Reactants = Total Mass Products 2H₂ (4g) + O₂ (32g) ➔ 2H₂O (36g) 36 g (Reactants) = 36 g (Product) ✓ Law of Constant Proportions Elements combine in fixed mass ratios Water (H₂O) Ratio = 1 : 8 by Mass Ammonia (NH₃) Ratio = 14 : 3 by Mass
NCERT Chapter 3 Fundamental Laws: Mass conservation and definite composition.
Law of Conservation of Mass
Antoine Lavoisier (1774): Mass can neither be created nor destroyed in a chemical reaction. Total Mass of Reactants = Total Mass of Products.
Law of Constant Proportions
Joseph Proust (1779): In a chemical substance, the elements are always present in definite proportions by mass (e.g., in water H₂O, mass ratio H:O is always strictly 1:8).
Dalton's Atomic Theory
Postulates: 1. All matter is made of indivisible atoms. 2. Atoms of a given element are identical in mass and properties. 3. Atoms combine in simple whole-number ratios. 4. Chemical reaction is a rearrangement of atoms.
Atomic Mass Unit (u)
1 unified atomic mass unit (1 u) = exactly 1/12th the mass of one carbon-12 atom = 1.6605 × 10⁻²⁷ kg.
Valency & Formula Writing
Criss-cross method: Write element symbols, write their combining valencies below, and cross them over. E.g. Al³⁺ and O²⁻ gives Al₂O₃; Ca²⁺ and Cl⁻ gives CaCl₂.
Molecular Mass
Sum of the atomic masses of all atoms present in a molecule. E.g., H₂O = 2(1) + 16 = 18 u; HNO₃ = 1 + 14 + 3(16) = 63 u.
🎯 Rohit Sir's Concept Breakdown: Chemical formula likhte waqt charges ya valencies cross-over hoti hain. Polyatomic ion (jaise OH⁻, SO₄²⁻) ke bahar bracket tabhi lagate hain jab subscript 2 ya usse bada ho, jaise Ca(OH)₂, lekin NaOH me bracket ki zaroorat nahi hai!
⚠️ Common Exam Trap Radar: H₂O me hydrogen aur oxygen ka ratio by mass 1:8 hota hai, lekin ratio by number of atoms 2:1 hota hai! Dono ko confuse mat karna.
⚡ Topper's Quick Calculation / Memory Trick: Common valencies finger-tips par rakho: Na⁺, K⁺, H⁺, Ag⁺, Cl⁻, NO₃⁻, OH⁻ = 1 | Ca²⁺, Mg²⁺, Zn²⁺, Cu²⁺, O²⁻, SO₄²⁻, CO₃²⁻ = 2 | Al³⁺, Fe³⁺, PO₄³⁻ = 3 | C⁴⁺, Si⁴⁺ = 4!
📌 In-Text (Page 32 - Numerical) ✓ 100/100 Step Marks Format

In a reaction, 5.3 g of sodium carbonate reacted with 6 g of ethanoic acid. The products were 2.2 g of carbon dioxide, 0.9 g of water and 8.2 g of sodium ethanoate. Show that these observations are in agreement with the law of conservation of mass.

✓ Step-by-Step Textbook Solution
📊 Law of Constant Proportions & Atomic Composition
Law of Conservation of Mass Total Mass Reactants = Total Mass Products 2H₂ (4g) + O₂ (32g) ➔ 2H₂O (36g) 36 g (Reactants) = 36 g (Product) ✓ Law of Constant Proportions Elements combine in fixed mass ratios Water (H₂O) Ratio = 1 : 8 by Mass Ammonia (NH₃) Ratio = 14 : 3 by Mass
NCERT Chapter 3 Fundamental Laws: Mass conservation and definite composition.

Equation of reaction:

Sodium carbonate + Ethanoic acid → Sodium ethanoate + Carbon dioxide + Water

Given:
•
Mass of Sodium carbonate = 5.3 g
•
Mass of Ethanoic acid = 6.0 g

Total mass of Reactants = 5.3 g + 6.0 g = 11.3 g

•
Mass of Sodium ethanoate = 8.2 g
•
Mass of Carbon dioxide = 2.2 g
•
Mass of Water = 0.9 g

Total mass of Products = 8.2 g + 2.2 g + 0.9 g = 11.3 g

Verification:

Total Mass of Reactants (11.3 g) = Total Mass of Products (11.3 g).

✅ Final Answer / Conclusion: Since mass is neither created nor destroyed during the reaction, these observations are in 100% agreement with the Law of Conservation of Mass.
📌 In-Text (Page 32 - Numerical) ✓ 100/100 Step Marks Format

Hydrogen and oxygen combine in the ratio of 1:8 by mass to form water. What mass of oxygen gas would be required to react completely with 3 g of hydrogen gas?

✓ Step-by-Step Textbook Solution
Given:
•
Ratio of mass of Hydrogen to Oxygen in water (H : O) = 1 : 8
•
Mass of Hydrogen gas = 3 g

Principle:

According to the Law of Constant Proportions, elements always combine in a fixed ratio by mass.

Calculation:

1 g of hydrogen requires = 8 g of oxygen

Therefore, 3 g of hydrogen requires = 3 × 8 g = 24 g of oxygen

✅ Final Answer / Conclusion: 24 g of oxygen gas is required to react completely with 3 g of hydrogen gas.
📌 In-Text (Page 32) ✓ 100/100 Step Marks Format

Which postulate of Dalton's atomic theory is the result of the law of conservation of mass?

✓ Step-by-Step Textbook Solution

The postulate stating:

"Atoms are indivisible particles, which can neither be created nor destroyed in a chemical reaction."

This postulate is the direct result of the Law of Conservation of Mass.

📌 In-Text (Page 32) ✓ 100/100 Step Marks Format

Which postulate of Dalton's atomic theory can explain the law of definite proportions?

✓ Step-by-Step Textbook Solution

The postulate stating:

"The relative number and kinds of atoms are constant in a given compound."

(or "Atoms combine in the ratio of small whole numbers to form compounds.")

This postulate directly explains the Law of Definite (Constant) Proportions.

📌 In-Text (Page 35) ✓ 100/100 Step Marks Format

Define the atomic mass unit.

✓ Step-by-Step Textbook Solution
1.
One atomic mass unit (1 u, formerly amu) is defined as a mass unit strictly equal to exactly one-twelfth (1/12th) of the mass of one atom of carbon-12 isotope.
2.
Mathematical value: 1 u = (Mass of 1 ¹²C atom) / 12 ≈ 1.66056 × 10⁻²⁴ g (or 1.66056 × 10⁻²⁷ kg).
📌 In-Text (Page 35) ✓ 100/100 Step Marks Format

Why is it not possible to see an atom with naked eyes?

✓ Step-by-Step Textbook Solution
1.
Atoms are extraordinarily tiny; their atomic radii are on the order of 10⁻¹⁰ metres (0.1 nanometre).
2.
The resolving power (limit of resolution) of human naked eyes is approximately 0.1 mm (10⁻⁴ m).
3.
Furthermore, the wavelength of visible light is 400 nm to 700 nm, which is thousands of times larger than an individual atom.
4.
Hence, individual atoms cannot reflect visible light to form an image on our retina.
📌 In-Text (Page 39) ✓ 100/100 Step Marks Format

Write down the formulae of: (i) sodium oxide (ii) aluminium chloride (iii) sodium suphide (iv) magnesium hydroxide

✓ Step-by-Step Textbook Solution

(i) Sodium oxide:

•
Symbols: Na and O
•
Valencies: Na = 1, O = 2
•
Criss-cross valencies: Na₂O₁ → Formula = Na₂O

(ii) Aluminium chloride:

•
Symbols: Al and Cl
•
Valencies: Al = 3, Cl = 1
•
Criss-cross valencies: Al₁Cl₃ → Formula = AlCl₃

(iii) Sodium sulphide:

•
Symbols: Na and S
•
Valencies: Na = 1, S = 2
•
Criss-cross valencies: Na₂S₁ → Formula = Na₂S

(iv) Magnesium hydroxide:

•
Symbols: Mg and OH
•
Valencies: Mg = 2, OH = 1
•
Criss-cross valencies: Mg₁(OH)₂ → Formula = Mg(OH)₂
📌 In-Text (Page 39) ✓ 100/100 Step Marks Format

Write down the names of compounds represented by the following formulae: (i) Al₂(SO₄)₃ (ii) CaCl₂ (iii) K₂SO₄ (iv) KNO₃ (v) CaCO₃

✓ Step-by-Step Textbook Solution

(i) Al₂(SO₄)₃: Aluminium sulphate (Cation: Al³⁺, Anion: SO₄²⁻)

(ii) CaCl₂: Calcium chloride (Cation: Ca²⁺, Anion: Cl⁻)

(iii) K₂SO₄: Potassium sulphate (Cation: K⁺, Anion: SO₄²⁻)

(iv) KNO₃: Potassium nitrate (Cation: K⁺, Anion: NO₃⁻)

(v) CaCO₃: Calcium carbonate (Cation: Ca²⁺, Anion: CO₃²⁻)

📌 In-Text (Page 40 - Calculations) ✓ 100/100 Step Marks Format

Calculate the molecular masses of: H₂, O₂, Cl₂, CO₂, CH₄, C₂H₆, C₂H₄, NH₃, CH₃OH. (Given atomic masses: H = 1 u, C = 12 u, N = 14 u, O = 16 u, Cl = 35.5 u)

✓ Step-by-Step Textbook Solution
Formula: Molecular mass = Sum of atomic masses of all constituent atoms
1.
H₂ = 2 × 1 = 2 u
2.
O₂ = 2 × 16 = 32 u
3.
Cl₂ = 2 × 35.5 = 71 u
4.
CO₂ = 12 + 2(16) = 12 + 32 = 44 u
5.
CH₄ = 12 + 4(1) = 12 + 4 = 16 u
6.
C₂H₆ = 2(12) + 6(1) = 24 + 6 = 30 u
7.
C₂H₄ = 2(12) + 4(1) = 24 + 4 = 28 u
8.
NH₃ = 14 + 3(1) = 14 + 3 = 17 u
9.
CH₃OH = 12 + 3(1) + 16 + 1 = 32 u
📌 In-Text (Page 40 - Calculations) ✓ 100/100 Step Marks Format

Calculate the formula unit masses of ZnO, Na₂O, K₂CO₃. (Given atomic masses: Zn = 65 u, Na = 23 u, K = 39 u, C = 12 u, O = 16 u)

✓ Step-by-Step Textbook Solution

Formula unit mass is used for ionic compounds:

1.
ZnO = Atomic mass of Zn + Atomic mass of O

ZnO = 65 + 16 = 81 u

2.
Na₂O = 2(Atomic mass of Na) + Atomic mass of O

Na₂O = 2(23) + 16 = 46 + 16 = 62 u

3.
K₂CO₃ = 2(Atomic mass of K) + Atomic mass of C + 3(Atomic mass of O)

K₂CO₃ = 2(39) + 12 + 3(16) = 78 + 12 + 48 = 138 u

Chapter 4 Chemistry 10 Complete Solutions

4. Structure of the Atom

Subatomic particles (electrons, protons, neutrons), Thomson's plum pudding model, Rutherford's alpha scattering experiment, Bohr's atomic model, Bohr-Bury distribution rules, valency, atomic & mass numbers, isotopes, and isobars.

📘 Chapter 4: Structure of the Atom Quick Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Bohr's Model of Atom (Energy Levels / Shells)
NUCLEUS (p⁺ + n⁰) K Shell (n=1, Max 2 e⁻) L Shell (n=2, Max 8 e⁻) M Shell (n=3, Max 18 e⁻) N Shell (n=4, Max 32 e⁻) Formula: Maximum capacity = 2n² electrons per discrete energy orbit
NCERT Fig. 4.3: Discrete energy levels (K, L, M, N orbits) proposed by Neils Bohr.
Subatomic Particles
Electron (e⁻): Discovered by J.J. Thomson (1897), charge -1, mass 1/1840 u (negligible). Proton (p⁺): Discovered by E. Goldstein (Canal rays, 1886), charge +1, mass 1 u. Neutron (n⁰): Discovered by J. Chadwick (1932), charge 0 (neutral), mass 1 u (located in nucleus).
Rutherford's Nuclear Model
Alpha particle scattering experiment on gold foil: 1. Most α-particles passed straight (most space inside atom is empty). 2. Few deflected by small angles (positive charge is localized). 3. 1 in 12,000 rebounded by 180° (all positive charge and almost all mass concentrated in a dense central nucleus).
Bohr's Atomic Model
Neil Bohr (1913): 1. Electrons revolve only in certain discrete non-radiating orbits (energy shells K, L, M, N... or n = 1, 2, 3, 4...). 2. While revolving in discrete orbits, electrons do not radiate energy.
Bohr-Bury Electron Distribution
1. Maximum capacity of a shell = 2n² (K=2, L=8, M=18, N=32). 2. Outermost shell can accommodate a maximum of 8 electrons (Octet rule). 3. Inner shells must be completely filled before electrons enter outer shells.
Valency Calculation
If valence electrons ≤ 4, Valency = valence electrons. If valence electrons > 4, Valency = 8 - (valence electrons). E.g. Carbon (2,4) valency = 4; Nitrogen (2,5) valency = 8 - 5 = 3; Oxygen (2,6) valency = 8 - 6 = 2; Neon (2,8) valency = 0.
Isotopes vs Isobars
Isotopes: Atoms of same element having same Atomic Number (Z) but different Mass Numbers (A). E.g., ¹H, ²H, ³H; ¹²C, ¹⁴C; ³⁵Cl, ³⁷Cl. Isobars: Atoms of different elements having same Mass Number (A) but different Atomic Numbers (Z). E.g., ⁴⁰Ar (Z=18) and ⁴⁰Ca (Z=20).
🎯 Rohit Sir's Concept Breakdown: Nucleus me protons aur neutrons hote hain (jinhe Nucleons kehte hain), aur electrons bahar discrete shells (K, L, M, N) me ghoomte hain. Mass Number A = Protons + Neutrons. Atomic Number Z = Number of Protons = Number of Electrons (in neutral atom).
⚠️ Common Exam Trap Radar: Chlorine ka atomic mass 35.5 u hota hai kyunki nature me do isotopes Cl-35 (75%) aur Cl-37 (25%) hote hain! Average mass = (35 × 75 + 37 × 25) / 100 = 35.5 u. Ye fractional mass isotope abundance ki wajah se hai, kisi fractional proton/neutron ki wajah se nahi!
⚡ Topper's Quick Calculation / Memory Trick: First 20 elements ki configuration: H(1), He(2), Li(2,1), Be(2,2), B(2,3), C(2,4), N(2,5), O(2,6), F(2,7), Ne(2,8), Na(2,8,1), Mg(2,8,2), Al(2,8,3), Si(2,8,4), P(2,8,5), S(2,8,6), Cl(2,8,7), Ar(2,8,8), K(2,8,8,1), Ca(2,8,8,2)!
📌 In-Text (Page 47) ✓ 100/100 Step Marks Format

What are canal rays?

✓ Step-by-Step Textbook Solution
1.
Canal rays (also known as anode rays) are streams of positively charged subatomic radiations discovered by German physicist Eugen Goldstein in 1886.
2.
When high voltage was passed through a gas discharge tube equipped with a perforated cathode at very low pressure, these positively charged radiations travelled in a direction opposite to cathode rays.
3.
Their discovery subsequently led to the discovery of the fundamental positively charged subatomic particle, the Proton.
📌 In-Text (Page 47) ✓ 100/100 Step Marks Format

If an atom contains one electron and one proton, will it carry any charge or not?

✓ Step-by-Step Textbook Solution
1.
The charge on one electron is -1 elementary unit (-1.6 × 10⁻¹⁹ C).
2.
The charge on one proton is +1 elementary unit (+1.6 × 10⁻¹⁹ C).
3.
Net charge on the atom = (+1) + (-1) = 0.
4.
Therefore, the positive and negative charges precisely balance and neutralize each other.
5.
Hence, the atom will carry zero net electrical charge; it will be electrically neutral (this represents a neutral Hydrogen atom, ¹H).
📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

On the basis of Thomson's model of an atom, explain how the atom is neutral as a whole.

✓ Step-by-Step Textbook Solution

According to J.J. Thomson's model of an atom (Plum Pudding / Watermelon Model):

1.
An atom consists of a positively charged sphere in which electrons are embedded, resembling dry fruits in a pudding or black seeds embedded in the red edible flesh of a watermelon.
2.
Postulate of neutrality: The total negative charge of the embedded electrons is exactly equal in magnitude to the total positive charge of the surrounding sphere.
3.
Because these opposite charges are equal in magnitude, they cancel each other out, making the atom electrically neutral as a whole.
📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

On the basis of Rutherford's model of an atom, which subatomic particle is present in the nucleus of an atom?

✓ Step-by-Step Textbook Solution

According to Rutherford's nuclear model of the atom:

1.
The subatomic particle present in the nucleus is the positively charged particle, the Proton.

(Note: Neutrons were later discovered by James Chadwick in 1932, which reside inside the nucleus alongside protons as nucleons).

📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

Draw a sketch of Bohr's model of an atom with three shells.

✓ Step-by-Step Textbook Solution
📊 Bohr's Model of Atom (Energy Levels / Shells)
NUCLEUS (p⁺ + n⁰) K Shell (n=1, Max 2 e⁻) L Shell (n=2, Max 8 e⁻) M Shell (n=3, Max 18 e⁻) N Shell (n=4, Max 32 e⁻) Formula: Maximum capacity = 2n² electrons per discrete energy orbit
NCERT Fig. 4.3: Discrete energy levels (K, L, M, N orbits) proposed by Neils Bohr.

Structure of Bohr's Atomic Model with three shells:

1.
At the center is the positively charged, dense Nucleus (+).
2.
Concentric circular non-radiating orbits (energy shells) surround the nucleus:
•
First shell (n = 1): K-shell (innermost, minimum energy, capacity 2 electrons).
•
Second shell (n = 2): L-shell (intermediate energy, capacity 8 electrons).
•
Third shell (n = 3): M-shell (outer energy level, capacity 18 electrons).
3.
Representation: Nucleus at center, surrounded by concentric circles labeled K, L, and M.
📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

What do you think would be the observation if the alpha-particle scattering experiment is carried out using a foil of a metal other than gold?

✓ Step-by-Step Textbook Solution
1.
If another heavy metal foil (like Platinum or Silver) with high atomic mass and ductility is used, similar results would be observed (most α-particles pass straight, few deflect, very few bounce back), because heavy nuclei possess substantial positive charge to deflect α-particles.
2.
However, if a very light metal foil (such as Lithium or Beryllium) is used, two major failures occur:
•
The foil cannot be beaten into extremely thin layers of ~1000 atoms thickness like gold (gold is the most malleable metal).
•
The nuclei of light elements have very few protons (small positive charge), and their mass is smaller than or comparable to an α-particle (mass 4 u). Consequently, the fast-moving α-particles would push the light nuclei aside and pass straight through without experiencing significant deflection or rebounds.
📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

Name the three sub-atomic particles of an atom.

✓ Step-by-Step Textbook Solution

The three fundamental subatomic particles of an atom are:

1.
Electron (e⁻): Discovered by J.J. Thomson. Charge: -1.6 × 10⁻¹⁹ C (-1), Relative Mass: ~1/1840 u, Location: Extra-nuclear orbits.
2.
Proton (p⁺): Discovered by E. Goldstein / Rutherford. Charge: +1.6 × 10⁻¹⁹ C (+1), Relative Mass: 1 u, Location: Inside Nucleus.
3.
Neutron (n⁰): Discovered by James Chadwick. Charge: 0 (neutral), Relative Mass: 1 u, Location: Inside Nucleus.
📌 In-Text (Page 49) ✓ 100/100 Step Marks Format

Helium atom has an atomic mass of 4 u and two protons in its nucleus. How many neutrons does it have?

✓ Step-by-Step Textbook Solution
Given:
•
Atomic Mass (Mass Number, A) = 4 u
•
Number of Protons (Atomic Number, Z) = 2
Formula:
•
Mass Number (A) = Number of Protons (p) + Number of Neutrons (n)
•
Number of Neutrons (n) = Mass Number (A) - Number of Protons (p)
Calculation:

n = 4 - 2 = 2

✅ Final Answer / Conclusion: A Helium atom has exactly 2 neutrons in its nucleus.
📌 In-Text (Page 50) ✓ 100/100 Step Marks Format

Write the distribution of electrons in carbon and sodium atoms.

✓ Step-by-Step Textbook Solution
1.
Carbon (Atomic Number Z = 6):
•
Total electrons = 6
•
Applying Bohr-Bury rule (2n²):
•
K-shell (n = 1): 2 electrons (maximum capacity)
•
L-shell (n = 2): 4 electrons (remaining)
•
Electronic Configuration of Carbon = 2, 4 (Valence electrons = 4, Valency = 4).
2.
Sodium (Atomic Number Z = 11):
•
Total electrons = 11
•
Applying Bohr-Bury rule:
•
K-shell: 2 electrons
•
L-shell: 8 electrons (maximum capacity for octet)
•
M-shell: 1 electron (remaining)
•
Electronic Configuration of Sodium = 2, 8, 1 (Valence electron = 1, Valency = 1).
📌 In-Text (Page 52) ✓ 100/100 Step Marks Format

If number of electrons in an atom is 8 and number of protons is also 8, then: (i) what is the atomic number of the atom? and (ii) what is the charge on the atom?

✓ Step-by-Step Textbook Solution

(i) Atomic Number (Z):

•
Definition: Atomic number equals the total number of protons present in the nucleus of an atom.
•
Given protons = 8, hence Atomic Number Z = 8 (This element is Oxygen).

(ii) Charge on the atom:

•
Total positive charge = +8 (from 8 protons)
•
Total negative charge = -8 (from 8 electrons)
•
Net charge = (+8) + (-8) = 0.
•
Therefore, the atom carries zero electrical charge (it is electrically neutral).
Chapter 5 Biology 10 Complete Solutions

5. The Fundamental Unit of Life

Discovery of cell, cell theory, plasma membrane, diffusion and osmosis (hypotonic/hypertonic/isotonic), cell wall and plasmolysis, nucleus, prokaryotes vs eukaryotes, cytoplasm, cell organelles, and cell division.

📘 Chapter 5: The Fundamental Unit of Life Quick Revision Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Plant Cell vs Animal Cell (Comparative Structural Anatomy)
Large Central Vacuole Nucleus Chloroplast Mitoch. PLANT CELL (Rigid Shape) Centric Nucleus Vacuole Mitochondria Centriole ANIMAL CELL (Flexible Shape) Key Differences: Plant cell has Cell Wall, Chloroplasts & Large Vacuole. Animal cell lacks Cell Wall & Plastids.
NCERT Fig. 5.5 & 5.6: Side-by-side comparative cytology of Plant vs Animal cells.
Milestones in Cell Biology
Robert Hooke (1665): Discovered cells in dead cork slice. Leeuwenhoek (1674): Observed free living cells in pond water. Robert Brown (1831): Discovered nucleus. Purkinje (1839): Coined term 'protoplasm'. Schleiden & Schwann (1838-39): Cell Theory (all organisms composed of cells, cell is basic unit). Rudolf Virchow (1855): Expanded cell theory - 'Omnis cellula-e-cellula' (cells arise from pre-existing cells).
Plasma Membrane & Osmosis
Selectively permeable lipid-protein bilayer. Diffusion: Spontaneous movement from high to low concentration. Osmosis: Diffusion of water across selectively permeable membrane. Hypotonic: Water enters, cell swells. Hypertonic: Water leaves, cell shrinks (plasmolysis in plants). Isotonic: No net movement, size unchanged.
Prokaryotic vs Eukaryotic
Prokaryotic: Size 1-10 μm, no nuclear membrane (primitive nucleoid), single circular chromosome, no membrane-bound organelles, 70S ribosomes (Bacteria). Eukaryotic: Size 5-100 μm, true nucleus with membrane, multiple chromosomes, membrane-bound organelles (Mitochondria, ER, Golgi) present, 80S ribosomes.
Key Organelle Functions
Endoplasmic Reticulum: RER (Protein synthesis with ribosomes), SER (Lipid synthesis & detoxification of poisons). Golgi Apparatus: Storage, modification & packaging of products; produces lysosomes. Lysosomes: 'Suicidal bags', contain digestive enzymes from RER. Mitochondria: 'Powerhouse of cell', produces ATP, double membrane with cristae, has own DNA & 70S ribosomes. Plastids: In plant cells, Chloroplasts (photosynthesis), Chromoplasts (colours), Leucoplasts (storage), have own DNA & ribosomes. Vacuoles: Turgidity in plant cells (central sap vacuole bounded by tonoplast).
Cell Division
Mitosis: For somatic growth and repair, produces 2 identical diploid (2n) daughter cells. Meiosis: In gonads/reproductive organs for gamete formation, two consecutive divisions produce 4 genetically distinct haploid (n) daughter cells with half chromosome count.
🎯 Rohit Sir's Concept Breakdown: Plant cell me Cell Wall (cellulose) extra protection deta hai jo animal cell me absent hota hai. Mitochondria aur Chloroplast semi-autonomous organelles hain kyunki unke paas apna khud ka DNA aur ribosomes hote hain!
⚠️ Common Exam Trap Radar: Examiner's trap: 'Why are lysosomes called suicide bags?' - Answer: Jab cell damage ya metabolic disturbance hoti hai, to lysosomes phat (burst) jaate hain aur unke powerful digestive enzymes apne hi cell ko digest/autolyse kar lete hain!
⚡ Topper's Quick Calculation / Memory Trick: Remember the Osmosis Rule: Hypo = Hippo (swells like a hippopotamus in water); Hyper = Hyper active (sweats out water and shrinks); Iso = Identical size!
📌 In-Text (Page 59) ✓ 100/100 Step Marks Format

Who discovered cells, and how?

✓ Step-by-Step Textbook Solution
1.
English scientist Robert Hooke discovered cells in the year 1665.
2.
Hooke examined a thin slice of bottle cork (bark of an oak tree) under his primitive self-designed microscope.
3.
He noticed that the cork resembled the structure of a honeycomb, consisting of numerous tiny compartments or little rooms separated by walls.
4.
Hooke coined the term 'cell' (derived from Latin *cellula*, meaning a little room) to describe these individual compartments.

(Note: Hooke observed dead cell walls of plant tissue).

📌 In-Text (Page 59) ✓ 100/100 Step Marks Format

Why is the cell called the structural and functional unit of life?

✓ Step-by-Step Textbook Solution
1.
Structural Unit:
•
All living organisms—from unicellular Amoeba to multicellular humans and giant trees—are physically constructed of cells and their products. Just as bricks are the structural units of a building, cells assemble together to form tissues, organs, and organ systems.
2.
Functional Unit:
•
A single cell is fully capable of independently executing all fundamental life processes, including nutrition, respiration, excretion, protein synthesis, energy generation (ATP), and reproduction.
3.
Conclusion:
•
Since an organism's structure is determined by cellular architecture and all life functions occur at the cellular level, the cell is universally defined as the fundamental structural and functional unit of life.
📌 In-Text (Page 61) ✓ 100/100 Step Marks Format

How do substances like CO₂ and water move in and out of the cell? Discuss.

✓ Step-by-Step Textbook Solution
1.
Movement of CO₂ (Diffusion):
•
Carbon dioxide is a cellular waste product generated during respiration.
•
CO₂ accumulates inside the cell, creating a high concentration compared to the external environment.
•
Due to this concentration difference, CO₂ moves spontaneously down its concentration gradient from inside (high concentration) to outside (low concentration) across the selectively permeable plasma membrane by the process of simple diffusion.
2.
Movement of Water (Osmosis):
•
Water molecules move across the selectively permeable plasma membrane along their concentration gradient by the special process of Osmosis.
•
If external water concentration is higher than inside, water enters the cell (Endosmosis).
•
If external water concentration is lower, water leaves the cell into the surroundings (Exosmosis).
📌 In-Text (Page 61) ✓ 100/100 Step Marks Format

Why is the plasma membrane called a selectively permeable membrane?

✓ Step-by-Step Textbook Solution
1.
The plasma membrane (cell membrane) is an extremely flexible boundary composed of organic molecules called lipids and proteins.
2.
It permits or allows the entry and exit of only certain specific molecules (such as respiratory gases O₂ and CO₂, water, glucose, and essential ions).
3.
Simultaneously, it actively blocks, restricts, or prevents the movement of harmful substances, unwanted foreign materials, and large macromolecules into or out of the cell.
4.
Because it selectively determines which materials can permeate through it, it is termed a 'selectively permeable membrane'.
📌 In-Text (Page 63) ✓ 100/100 Step Marks Format

Fill in the gaps in the following table illustrating differences between prokaryotic and eukaryotic cells:

✓ Step-by-Step Textbook Solution

Comparison of Prokaryotic and Eukaryotic Cells:

1.
Size:
•
Prokaryotic Cell: Generally small (1 – 10 μm) [1 μm = 10⁻⁶ m].
•
Eukaryotic Cell: Generally larger (5 – 100 μm).
2.
Nuclear Region:
•
Prokaryotic Cell: Poorly defined nuclear region lacking a nuclear membrane, containing only naked nucleic acid (DNA); termed a Nucleoid.
•
Eukaryotic Cell: Well defined nuclear region surrounded by a double-layered nuclear membrane; contains nucleolus and chromatin.
3.
Chromosomes:
•
Prokaryotic Cell: Single circular chromosome.
•
Eukaryotic Cell: More than one linear chromosome (complexed with histone proteins).
4.
Membrane-bound Organelles:
•
Prokaryotic Cell: Membrane-bound cell organelles (such as Mitochondria, Plastids, ER, Golgi apparatus, Lysosomes) are completely absent.
•
Eukaryotic Cell: Membrane-bound cell organelles are present.
📌 In-Text (Page 65) ✓ 100/100 Step Marks Format

Can you name the two organelles we have studied that contain their own genetic material?

✓ Step-by-Step Textbook Solution

The two semi-autonomous cell organelles that possess their own genetic material (DNA) and ribosomes are:

1.
Mitochondria (possess circular mitochondrial DNA and 70S ribosomes; can synthesize some of their own proteins).
2.
Plastids / Chloroplasts (present in plant cells, possess plastid DNA and ribosomes; can synthesize their own enzymes for photosynthesis).
📌 In-Text (Page 65) ✓ 100/100 Step Marks Format

If the organisation of a cell is destroyed due to some physical or chemical influence, what will happen?

✓ Step-by-Step Textbook Solution
1.
The cell's structural integrity (plasma membrane, cytoplasm, and organelle compartmentalization) will collapse.
2.
Consequently, the specialized organelles will fail to coordinate metabolic activities such as respiration, ATP synthesis, protein synthesis, and waste removal.
3.
In response to severe cellular damage, the lysosomal membranes will rupture, releasing active hydrolytic digestive enzymes that digest the cell's own components (autolysis).
4.
The cell will lose its ability to maintain homeostasis and will permanently die.
📌 In-Text (Page 65) ✓ 100/100 Step Marks Format

Why are lysosomes known as suicide bags?

✓ Step-by-Step Textbook Solution
1.
Lysosomes are membrane-bound vesicles containing powerful hydrolytic digestive enzymes (synthesized by the Rough Endoplasmic Reticulum) capable of breaking down all organic materials.
2.
When normal cellular metabolism is disrupted or when a cell suffers physical or chemical injury or infection, the cell becomes damaged beyond repair.
3.
In such circumstances, the lysosomes rupture, and their released digestive enzymes digest their own parent cell from the inside out (autolysis).
4.
Because they destroy their own host cell upon rupture, lysosomes are universally nicknamed the 'Suicide Bags' of the cell.
📌 In-Text (Page 65) ✓ 100/100 Step Marks Format

Where are proteins synthesised inside the cell?

✓ Step-by-Step Textbook Solution
1.
Proteins are synthesized on the Ribosomes inside the cell.
2.
Ribosomes are either found attached to the outer surface of the Rough Endoplasmic Reticulum (RER), giving it a granular appearance, or floating freely in the cytoplasm.
3.
The synthesized proteins on RER are subsequently transported to the Golgi apparatus for processing, modification, and packaging.
📌 Exercises (Q1) ✓ 100/100 Step Marks Format

Make a comparison and write down ways in which plant cells are different from animal cells.

✓ Step-by-Step Textbook Solution
📊 Plant Cell vs Animal Cell (Comparative Structural Anatomy)
Large Central Vacuole Nucleus Chloroplast Mitoch. PLANT CELL (Rigid Shape) Centric Nucleus Vacuole Mitochondria Centriole ANIMAL CELL (Flexible Shape) Key Differences: Plant cell has Cell Wall, Chloroplasts & Large Vacuole. Animal cell lacks Cell Wall & Plastids.
NCERT Fig. 5.5 & 5.6: Side-by-side comparative cytology of Plant vs Animal cells.

Differences Between Plant Cells and Animal Cells:

1.
Cell Wall:
•
Plant Cell: Present (Rigid, outer protective wall made of cellulose).
•
Animal Cell: Absent (Enclosed only by flexible plasma membrane).
2.
Plastids / Chloroplasts:
•
Plant Cell: Present (Chloroplasts for photosynthesis, chromoplasts, leucoplasts).
•
Animal Cell: Absent.
3.
Vacuoles:
•
Plant Cell: Single, prominent, permanent central vacuole occupying 50% to 90% of cell volume, providing turgidity.
•
Animal Cell: Small, temporary, and multiple vacuoles (if present).
4.
Centrosome / Centrioles:
•
Plant Cell: Absent (in higher plants).
•
Animal Cell: Present (assists in spindle formation during cell division).
5.
Position of Nucleus:
•
Plant Cell: Pushed to the periphery (eccentric) due to the large central vacuole.
•
Animal Cell: Located centrally.
Chapter 6 Biology 10 Complete Solutions

6. Tissues

Plant tissues (Meristematic vs Permanent; Parenchyma, Collenchyma, Sclerenchyma, Xylem & Phloem) and Animal tissues (Epithelial, Connective, Muscular, Nervous).

📘 Chapter 6: Plant & Animal Tissues Quick Revision Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Structure of a Neuron (Nerve Cell)
Nucleus Dendrites (Receptors) Cyton (Cell Body) Myelin Sheath (Insulating Layer) Axon (Transmission Fiber) Nerve Endings (Synapse Link) Signal Direction: Dendrite ➔ Cyton ➔ Axon ➔ Nerve Endings (Electrochemical impulse)
NCERT Fig. 6.12: Morphological parts of a nerve cell / neuron transmitting nerve impulses.
Definition of Tissue
A cluster or group of cells similar in structure and working together to perform a specific function (e.g., blood, phloem, muscle).
Meristematic Tissues (Plant)
Actively dividing cells with dense cytoplasm, thin cellulose walls, prominent nuclei, and NO vacuoles. 1. Apical: Tips of roots and stems, increases vertical length. 2. Lateral (Cambium): Increases girth/thickness of stem/root. 3. Intercalary: Located at base of leaves or internodes (grasses), increases length between nodes.
Simple Permanent Tissues (Plant)
1. Parenchyma: Living, thin-walled, unspecialised, loosely packed with intercellular spaces, stores food. Chlorenchyma contains chlorophyll (photosynthesis); Aerenchyma has large air cavities (buoyancy in aquatic plants). 2. Collenchyma: Living, elongated cells with irregular pectin thickenings at corners, minimal intercellular spaces, provides mechanical flexibility and bending without breaking. 3. Sclerenchyma: Dead cells with thick lignified walls, narrow lumen, no intercellular space; provides rigidity and mechanical strength (e.g., husk of coconut, walnut shells).
Complex Permanent Tissues (Plant)
Conducting / Vascular tissues: 1. Xylem: Unidirectional transport of water and minerals (Tracheids, Vessels, Xylem parenchyma [only living element], Xylem fibres). 2. Phloem: Bidirectional translocation of food from leaves to all parts (Sieve tubes, Companion cells, Phloem parenchyma, Phloem fibres/bast [only dead element]).
Animal Tissues Overview
1. Epithelial: Protective covering. Squamous (thin diffusion sheet in alveoli), Stratified squamous (skin), Cuboidal (kidney tubules, support), Columnar (intestine absorption), Ciliated (respiratory tract, mucus movement). 2. Connective: Areolar (tissue repair, packaging), Adipose (fat storage, insulation), Bone (hard Ca-P matrix), Cartilage (flexible nose/ear), Tendon (dense fibrous, connects muscle to bone), Ligament (elastic, connects bone to bone), Blood (fluid connective tissue with plasma, RBC, WBC, platelets). 3. Muscular: Striated (skeletal, voluntary, multinucleate, banded), Smooth (involuntary, spindle-shaped, uninucleate, internal organs), Cardiac (heart, branched, rhythmic involuntary contractions). 4. Nervous: Neurons (Cell body/Cyton, Dendrites, Axon, Nerve endings) transmitting electrical impulses.
🎯 Rohit Sir's Concept Breakdown: Plant tissues me majority dead supportive tissues hote hain kyunki plants stationary hote hain, jabki animals locomotion karte hain isliye unke majority tissues living hote hain. Differentiation wo process hai jisme meristematic cells divide hona band karke permanent shape, size aur function adopt karte hain.
⚠️ Common Exam Trap Radar: Xylem me sirf Xylem Parenchyma living hota hai, baki sab (Tracheids, Vessels, Fibres) dead hote hain! Phloem me sirf Phloem Fibres dead hote hain, baki sab (Sieve tubes, Companion cells, Parenchyma) living hote hain!
⚡ Topper's Quick Calculation / Memory Trick: Tendon vs Ligament mnemonic: M-T-B (Muscle to Bone = Tendon). B-L-B (Bone to Bone = Ligament)!
📌 In-Text (Page 69) ✓ 100/100 Step Marks Format

What is a tissue?

✓ Step-by-Step Textbook Solution
1.
A tissue is defined as a cluster or organized group of cells having a common origin, similar structural organization, and working in coordination to perform a specific common biological function.
2.
Examples include Blood and Muscle in animals, and Xylem and Phloem in plants.
📌 In-Text (Page 69) ✓ 100/100 Step Marks Format

What is the utility of tissues in multicellular organisms?

✓ Step-by-Step Textbook Solution
1.
Division of Labour: In multicellular organisms, different groups of specialized cells (tissues) take responsibility for distinct physiological functions (e.g., muscle cells contract for movement, nerve cells carry impulses, xylem transports water).
2.
Higher Efficiency: Specialization allows tissues to perform their specific tasks with maximum precision and metabolic efficiency compared to a single unicellular organism.
3.
Higher Survival Rate & Structural Strength: Tissues organize into organs and organ systems, providing structural mechanical support and higher adaptability for long organismal life spans.
📌 In-Text (Page 73) ✓ 100/100 Step Marks Format

Name types of simple tissues.

✓ Step-by-Step Textbook Solution
📊 Classification of Plant Tissues Flowchart
PLANT TISSUES Meristematic (Dividing) Apical Lateral (Girth) Intercalary Permanent Tissues Simple Permanent • Parenchyma • Collenchyma • Sclerenchyma Complex Permanent • Xylem (Water) • Phloem (Food)
NCERT Chapter 6 Hierarchy: Division of plant tissues into dividing and permanent categories.

The three primary types of simple permanent plant tissues are:

1.
Parenchyma (contains subtypes: Chlorenchyma and Aerenchyma)
2.
Collenchyma
3.
Sclerenchyma

(In addition, protective tissue like Epidermis is also classified under simple plant tissues).

📌 In-Text (Page 73) ✓ 100/100 Step Marks Format

Where is apical meristem found?

✓ Step-by-Step Textbook Solution
1.
Apical meristem is found at the growing growing apices (tips) of roots and stems in plants.
2.
Function: Its continuous active cell divisions cause the primary elongation (increase in length) of both the root system (penetrating soil) and shoot system (growing towards light).
📌 In-Text (Page 73) ✓ 100/100 Step Marks Format

Which tissue makes up the husk of coconut?

✓ Step-by-Step Textbook Solution
1.
Sclerenchymatous tissue (Sclerenchyma fibres) makes up the husk of a coconut.
2.
Characteristics: Cells of sclerenchyma are dead, long, narrow, and have extremely thick cell walls heavily impregnated with a chemical cement called Lignin.
3.
This lignified dead tissue provides high tensile strength, rigidity, and shock-absorbing protection to the inner coconut seed.
📌 In-Text (Page 73) ✓ 100/100 Step Marks Format

What are the constituents of phloem?

✓ Step-by-Step Textbook Solution

Phloem is a complex permanent vascular tissue composed of four distinct elements:

1.
Sieve Tubes (tubular living cells with perforated end walls called sieve plates).
2.
Companion Cells (elongated living cells with dense cytoplasm and prominent nucleus, regulating sieve tube activities).
3.
Phloem Parenchyma (living cells that store food and assist in lateral food conduction).
4.
Phloem Fibres / Bast Fibres (dead, thick-walled sclerenchymatous fibres that provide mechanical strength; the only non-living component of phloem).
📌 In-Text (Page 77) ✓ 100/100 Step Marks Format

Name the tissue responsible for movement in our body.

✓ Step-by-Step Textbook Solution
1.
Muscular tissue (specifically skeletal / striated muscle fibres working in conjunction with skeletal bones) is responsible for movement in our body.
2.
Mechanism: Muscle cells contain specialized contractile proteins (actin and myosin) that actively contract and relax in response to nerve signals, generating mechanical force and bodily motion.
📌 In-Text (Page 77) ✓ 100/100 Step Marks Format

What does a neuron look like?

✓ Step-by-Step Textbook Solution
📊 Structure of a Neuron (Nerve Cell)
Nucleus Dendrites (Receptors) Cyton (Cell Body) Myelin Sheath (Insulating Layer) Axon (Transmission Fiber) Nerve Endings (Synapse Link) Signal Direction: Dendrite ➔ Cyton ➔ Axon ➔ Nerve Endings (Electrochemical impulse)
NCERT Fig. 6.12: Morphological parts of a nerve cell / neuron transmitting nerve impulses.

A neuron (nerve cell) is the fundamental functional unit of nervous tissue. It resembles a miniature tree or star-like structure:

1.
Cell Body (Cyton): Contains a large central nucleus and granular cytoplasm with cell organelles.
2.
Dendrites: Short, highly branched, tapering fiber projections arising from the cyton that receive incoming nerve impulses from neighboring neurons.
3.
Axon: A single, exceptionally long cylindrical fiber (can be up to 1 metre long) that conducts the nerve impulse away from the cell body toward target cells.
4.
Nerve Endings / Terminal Arborizations: Fine branchings at the end of the axon that transmit signals to the next neuron or muscle via a microscopic gap called a Synapse.
📌 In-Text (Page 77) ✓ 100/100 Step Marks Format

Give three features of cardiac muscles.

✓ Step-by-Step Textbook Solution

Three distinct histological and physiological features of cardiac muscles are:

1.
Structural Appearance: Cardiac muscle cells are cylindrical in shape, have branched interconnected networks, and possess a single centrally placed nucleus (uninucleate).
2.
Faint Striations: They exhibit faint transverse light and dark bands (striations) with specialized intercalated discs connecting adjacent fibers for rapid electrical communication.
3.
Involuntary & Rhythmic Action: They are strictly involuntary muscles that undergo continuous, rhythmic contraction and relaxation throughout an organism's lifetime without suffering any muscular fatigue or cramp.
📌 In-Text (Page 77) ✓ 100/100 Step Marks Format

What are the functions of areolar tissue?

✓ Step-by-Step Textbook Solution

Areolar connective tissue is found between the skin and muscles, around blood vessels and nerves, and in the bone marrow. Its primary functions are:

1.
Packaging Material: It fills the empty internal spaces within organs and cushions vital organs against mechanical trauma.
2.
Structural Support: It binds internal organs, nerves, and vessels securely in place, attaching the skin to underlying muscle layers.
3.
Tissue Repair: It assists actively in the repair and regeneration of damaged tissues following injury by providing fibroblasts and macrophage defense cells.
Chapter 7 Physics 10 Complete Solutions

7. Motion

Kinematics in 1D, distance vs displacement, speed and velocity, uniform/non-uniform motion, acceleration, graphical derivation of 3 equations of motion, and uniform circular motion.

📘 Chapter 7: Motion Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Velocity-Time (v-t) Graph for Derivation of Equations of Motion
Time t (s) Velocity v (m/s) O (0,0) A (u) B (v) D C (t) Area of △ABD = ½ × t × (v - u) Area of Rectangle OADC = u × t 1. v = u + at 2. s = ut + ½at² 3. 2as = v² - u²
NCERT Fig. 7.8: Velocity-Time graph of a body with initial velocity u under uniform acceleration a.
Distance vs Displacement
Distance: Actual path length travelled (scalar, always ≥ 0, unit metre m). Displacement: Shortest straight-line distance between initial and final positions (vector, can be positive, zero, or negative, unit metre m). Displacement magnitude ≤ Distance.
Speed vs Velocity
Speed = Distance / Time (scalar, m/s). Velocity = Displacement / Time (vector, m/s). Average Speed = Total Distance / Total Time. Average Velocity = (Initial velocity u + Final velocity v) / 2 for uniform acceleration.
Acceleration
Rate of change of velocity: a = (v - u) / t (vector, SI unit m/s²). Positive acceleration: velocity increases (v > u). Negative acceleration (Retardation/Deceleration): velocity decreases (v < u).
Equations of Motion
For uniform linear acceleration a: 1. First Equation: v = u + at (Velocity-Time relation) 2. Second Equation: s = ut + (1/2)at² (Position-Time relation) 3. Third Equation: v² = u² + 2as (Position-Velocity relation) (Where u = initial velocity, v = final velocity, a = acceleration, t = time, s = distance/displacement).
Graphs of Motion
• Slope of Distance-Time (s-t) graph gives Speed. • Slope of Velocity-Time (v-t) graph gives Acceleration. • Area under Velocity-Time (v-t) graph gives Displacement / Distance travelled.
Uniform Circular Motion
When an object moves along a circular path with constant speed, its direction changes continuously at every point, making it an accelerated motion. Linear speed v = (2πr) / t, where r = radius and t = time period of one revolution.
🎯 Rohit Sir's Concept Breakdown: Unit conversion golden rule: km/h ko m/s me convert karne ke liye 5/18 se multiply karo (e.g., 72 km/h = 72 × (5/18) = 20 m/s). m/s ko km/h me convert karne ke liye 18/5 se multiply karo! Jab vehicle 'starts from rest' ho to u = 0. Jab brakes apply karke vehicle 'comes to stop' ho to v = 0 aur acceleration negative (retardation) hota hai!
⚠️ Common Exam Trap Radar: Examiner's trap: Distance zero nahi ho sakta agar motion hua hai, lekin displacement zero ho sakta hai agar object ghoom kar wapas apni starting position par aa jaye (jaise circular track par 1 round complete karne par displacement = 0)!
⚡ Topper's Quick Calculation / Memory Trick: Graph questions: Velocity-Time graph ka area nikalne ke liye simple geometry lagao: Triangle ka area = (1/2) × base × height, Rectangle ka area = length × breadth, Trapezium ka area = (1/2) × (sum of parallel sides) × height!
📌 In-Text (Page 74) ✓ 100/100 Step Marks Format

An object has moved through a distance. Can it have zero displacement? If yes, support your answer with an example.

✓ Step-by-Step Textbook Solution

Yes, an object that has moved through a non-zero distance can definitely have zero displacement.

Reason:
•
Distance is the total scalar length of the actual path traversed by the moving object.
•
Displacement is the shortest vector distance between the initial position and the final position.
•
If the moving object returns to its starting point (initial position = final position), the net displacement is precisely zero, even though the total distance covered is greater than zero.

Example 1: A boy walks from his home to school (2 km) and returns back home in the evening. Total distance = 2 + 2 = 4 km, but net displacement = 0 km.

Example 2: An athlete runs around a circular track of radius r. After completing 1 full lap, distance covered = 2πr, while displacement = 0.

📌 In-Text (Page 74 - Numerical) ✓ 100/100 Step Marks Format

A farmer moves along the boundary of a square field of side 10 m in 40 s. What will be the magnitude of displacement of the farmer at the end of 2 minutes 20 seconds from his initial position?

✓ Step-by-Step Textbook Solution
Given:
•
Side of square field (s) = 10 m
•
Perimeter of square field = 4 × side = 4 × 10 = 40 m
•
Time taken to complete 1 round = 40 s
•
Total time of movement = 2 minutes 20 seconds = (2 × 60) + 20 = 140 s
Step 1: Calculate total rounds completed:

Number of rounds = Total time / Time for 1 round = 140 / 40 = 3.5 rounds

Step 2: Determine final position:
•
In 3 full rounds (120 s), the farmer returns to starting vertex A (displacement = 0).
•
In the remaining 0.5 round (20 s), the farmer moves across 2 sides (20 m), reaching the diagonally opposite vertex C.
Step 3: Calculate displacement magnitude (Diagonal AC):

In right-angled triangle ABC, using Pythagoras Theorem:

AC² = AB² + BC²

AC² = 10² + 10² = 100 + 100 = 200

AC = √200 = 10√2 m ≈ 10 × 1.414 = 14.14 m

✅ Final Answer / Conclusion: The magnitude of displacement of the farmer is 10√2 m (or 14.14 m).
📌 In-Text (Page 74) ✓ 100/100 Step Marks Format

Which of the following is true for displacement? (a) It cannot be zero. (b) Its magnitude is greater than the distance travelled by the object.

✓ Step-by-Step Textbook Solution

(a) Statement (a) is FALSE:

Displacement can be zero when the initial and final positions of the moving object coincide (e.g., in a round trip).

(b) Statement (b) is FALSE:

The magnitude of displacement can never be greater than the distance travelled. Displacement is the shortest straight-line path between two points. Hence, Magnitude of Displacement ≤ Distance.

(It is equal to distance only in unidirectional straight-line motion; otherwise, it is strictly less than distance).

📌 In-Text (Page 76) ✓ 100/100 Step Marks Format

Distinguish between speed and velocity.

✓ Step-by-Step Textbook Solution

Comparison of Speed and Velocity:

1.
Definition:
•
Speed: Distance travelled by an object per unit time (Speed = Distance / Time).
•
Velocity: Displacement of an object per unit time in a specified direction (Velocity = Displacement / Time).
2.
Nature of Quantity:
•
Speed: Scalar quantity (has only magnitude, no direction).
•
Velocity: Vector quantity (has both magnitude and direction).
3.
Value / Sign:
•
Speed: Always positive (or zero for object at rest); can never be negative.
•
Velocity: Can be positive, zero, or negative depending on the direction of displacement.
4.
Average Value in Round Trip:
•
Speed: Average speed is always greater than zero for a moving object.
•
Velocity: Average velocity is zero for an object returning to its starting point.
5.
SI Unit:
•
Both share the same SI unit: metre per second (m/s or m·s⁻¹).
📌 In-Text (Page 76) ✓ 100/100 Step Marks Format

Under what condition(s) is the magnitude of average velocity of an object equal to its average speed?

✓ Step-by-Step Textbook Solution

The magnitude of average velocity is equal to the average speed when:

1.
The object moves along a straight line in a fixed, single direction without reversing or changing direction.
Reason:

In unidirectional straight-line motion, the total distance travelled is exactly equal to the magnitude of the displacement (Distance = |Displacement|). Hence:

Average Speed = Total Distance / Time = |Displacement| / Time = |Average Velocity|.

📌 In-Text (Page 76) ✓ 100/100 Step Marks Format

What does the odometer of an automobile measure?

✓ Step-by-Step Textbook Solution
1.
The odometer of an automobile measures the total distance travelled by the vehicle (usually indicated in kilometres, km).

(Note: The instantaneous speed of the vehicle is measured by a separate instrument called the Speedometer in km/h).

📌 In-Text (Page 77 - Numerical) ✓ 100/100 Step Marks Format

During an experiment, a signal from a spaceship reached the ground station in five minutes. What was the distance of the spaceship from the ground station? The signal travels at the speed of light, that is, 3 × 10⁸ m/s.

✓ Step-by-Step Textbook Solution
Given:
•
Speed of light signal (v) = 3 × 10⁸ m/s
•
Time taken (t) = 5 minutes = 5 × 60 s = 300 s
Formula:
•
Distance (s) = Speed (v) × Time (t)
Calculation:

s = (3 × 10⁸ m/s) × 300 s

s = 900 × 10⁸ m = 9 × 10¹⁰ m (or 9 × 10⁷ km)

✅ Final Answer / Conclusion: The distance of the spaceship from the ground station was 9 × 10¹⁰ m (90 million kilometres).
📌 In-Text (Page 77 - Numerical) ✓ 100/100 Step Marks Format

A bus decreases its speed from 80 km/h to 60 km/h in 5 s. Find the acceleration of the bus.

✓ Step-by-Step Textbook Solution
Given:
•
Initial velocity (u) = 80 km/h = 80 × (5/18) = 400/18 = 22.22 m/s
•
Final velocity (v) = 60 km/h = 60 × (5/18) = 300/18 = 16.67 m/s
•
Time taken (t) = 5 s
Formula:
•
Acceleration (a) = (v - u) / t
Calculation:

a = (16.67 - 22.22) / 5 = -5.55 / 5 = -1.11 m/s²

(In fractional form: a = ((300/18) - (400/18)) / 5 = (-100/18) / 5 = -20/18 = -1.11 m/s²)

✅ Final Answer / Conclusion: The acceleration of the bus is -1.11 m/s² (or a retardation of 1.11 m/s²).
📌 In-Text (Page 77 - Numerical) ✓ 100/100 Step Marks Format

A train starting from a railway station and moving with uniform acceleration attains a speed 40 km/h in 10 minutes. Find its acceleration.

✓ Step-by-Step Textbook Solution
📊 Velocity-Time (v-t) Graph for Derivation of Equations of Motion
Time t (s) Velocity v (m/s) O (0,0) A (u) B (v) D C (t) Area of △ABD = ½ × t × (v - u) Area of Rectangle OADC = u × t 1. v = u + at 2. s = ut + ½at² 3. 2as = v² - u²
NCERT Fig. 7.8: Velocity-Time graph of a body with initial velocity u under uniform acceleration a.
Given:
•
Train starts from rest → Initial velocity (u) = 0 m/s
•
Final velocity (v) = 40 km/h = 40 × (5/18) = 200/18 = 11.11 m/s
•
Time taken (t) = 10 minutes = 10 × 60 s = 600 s
Formula:
•
Acceleration (a) = (v - u) / t
Calculation:

a = (11.11 - 0) / 600 = 11.11 / 600 ≈ 0.0185 m/s²

(Fractional form: a = (200/18) / 600 = 200 / (18 × 600) = 1 / 54 ≈ 0.0185 m/s²)

✅ Final Answer / Conclusion: The acceleration of the train is 0.0185 m/s² (or 1/54 m/s²).
📌 In-Text (Page 83 - Numerical) ✓ 100/100 Step Marks Format

A bus starting from rest moves with a uniform acceleration of 0.1 m/s² for 2 minutes. Find (a) the speed acquired, (b) the distance travelled.

✓ Step-by-Step Textbook Solution
Given:
•
Initial velocity (u) = 0 m/s (starts from rest)
•
Acceleration (a) = 0.1 m/s²
•
Time (t) = 2 minutes = 2 × 60 = 120 s

(a) To find the speed acquired (v):

Using First Equation of Motion: v = u + at

v = 0 + (0.1 × 120) = 12 m/s

(In km/h: 12 × (18/5) = 43.2 km/h)

(b) To find the distance travelled (s):

Using Second Equation of Motion: s = ut + (1/2)at²

s = (0 × 120) + (1/2 × 0.1 × (120)²)

s = 0 + (0.5 × 0.1 × 14400) = 0.05 × 14400 = 720 m

✅ Final Answer / Conclusion: • (a) Speed acquired = 12 m/s (43.2 km/h)
•
(b) Distance travelled = 720 m.
Chapter 8 Physics 10 Complete Solutions

8. Force and Laws of Motion

Balanced & unbalanced forces, Galileo's inclined plane experiment, Newton's 3 Laws of Motion, inertia and mass, momentum (p = mv), F = ma derivation, impulse, action-reaction pairs, and momentum conservation.

📘 Chapter 8: Force and Laws of Motion Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Law of Conservation of Momentum (Collision of Two Masses)
BEFORE COLLISION: m₁ u₁ m₂ u₂ (u₁ > u₂) DURING COLLISION: m₁ m₂ F₁₂ = -F₂₁ (Action = -Reaction) AFTER COLLISION: m₁ v₁ m₂ v₂ m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
NCERT Fig. 8.14: Conservation of total linear momentum in an isolated system during impact.
Newton's First Law (Law of Inertia)
An object continues in its state of rest or uniform motion in a straight line unless acted upon by an external unbalanced force. Inertia: Natural tendency of an object to resist changes in its state of motion. Mass is the quantitative measure of inertia.
Momentum (p)
Momentum p = m × v (vector quantity). SI Unit: kg·m/s (or N·s). A heavy truck moving at slow speed has high momentum due to large mass; a bullet has high momentum due to extreme velocity.
Newton's Second Law
The rate of change of momentum of an object is directly proportional to the applied unbalanced force in the direction of force: F = dp/dt = m(v - u)/t = ma. Force F = ma. SI Unit: Newton (N) = 1 kg·m/s².
Newton's Third Law
To every action, there is an equal and opposite reaction: F_AB = -F_BA. Action and reaction forces always act on two different bodies simultaneously; hence, they never cancel each other out.
Conservation of Momentum
In an isolated system (no external unbalanced force), total linear momentum is conserved: Initial Momentum = Final Momentum ⇒ m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂. Recoil velocity of gun: V_gun = -(m_bullet × v_bullet) / M_gun.
🎯 Rohit Sir's Concept Breakdown: Action aur Reaction forces do ALAG-ALAG objects par lagte hain, isliye wo ek doosre ko cancel nahi karte! Jab fielder ball catch karte waqt apne haath peeche kheechta hai, to wo time period (t) badhata hai, jisse rate of change of momentum (F = Δp/t) kam ho jata hai aur haath par chot nahi lagti!
⚠️ Common Exam Trap Radar: Examiner's trap: Action and reaction equal hote hain, lekin unke dwara produce hone wali acceleration equal nahi hoti kyunki a = F/m (jis body ka mass zyada hoga uski acceleration kam hogi, jaise gun ka recoil acceleration bullet ke muqable bohot kam hota hai)!
⚡ Topper's Quick Calculation / Memory Trick: Recoil velocity me minus sign indicate karta hai ki gun bullet ke opposite direction me piche ki taraf move karti hai!
📌 In-Text (Page 89) ✓ 100/100 Step Marks Format

Which of the following has more inertia: (a) a rubber ball and a stone of the same size? (b) a bicycle and a train? (c) a five-rupees coin and a one-rupee coin?

✓ Step-by-Step Textbook Solution

Principle: Mass is the quantitative measure of the inertia of an object. The greater the mass of a body, the greater is its inertia.

(a) A stone has much greater mass and density than a rubber ball of the same size. Therefore, the stone has more inertia.

(b) A train has an immensely larger mass than a bicycle. Therefore, the train has far more inertia.

(c) A five-rupee coin is thicker, heavier, and has more mass than a one-rupee coin. Therefore, the five-rupee coin has more inertia.

📌 In-Text (Page 89) ✓ 100/100 Step Marks Format

In the following example, try to identify the number of times the velocity of the ball changes: "A football player kicks a football to another player of his team who kicks the football towards the goal. The goalkeeper of the opposite team collects the football and kicks it towards a player of his own team". Also identify the agent supplying the force in each case.

✓ Step-by-Step Textbook Solution

The velocity of the football changes a total of 4 times:

1.
First Change: The first football player kicks the stationary ball to pass it to a teammate (Agent supplying force: First football player).
2.
Second Change: The teammate kicks the moving football toward the goalpost, altering both its speed and direction (Agent supplying force: Teammate).
3.
Third Change: The goalkeeper stops/catches the moving ball, bringing its velocity to zero (Agent supplying force: Goalkeeper).
4.
Fourth Change: The goalkeeper kicks the collected football toward a player of his own team, accelerating it from rest (Agent supplying force: Goalkeeper).
📌 In-Text (Page 89) ✓ 100/100 Step Marks Format

Explain why some of the leaves may get detached from a tree if we vigorously shake its branch.

✓ Step-by-Step Textbook Solution
1.
Initially, both the tree branch and the leaves attached to it are in a state of rest.
2.
When we vigorously shake the branch, an external force acts directly on the branch, bringing it into a rapid state of motion (vibration).
3.
However, due to the Inertia of Rest (Newton's First Law of Motion), the leaves tend to resist this change and attempt to maintain their original stationary state.
4.
As a result, a massive inertial shearing stress develops at the junction (petiole) connecting the leaves to the moving branch, breaking the weak stalk and causing the leaves to detach and fall under gravity.
📌 In-Text (Page 89) ✓ 100/100 Step Marks Format

Why do you fall in the forward direction when a moving bus brakes to a stop and fall backwards when it accelerates from rest?

✓ Step-by-Step Textbook Solution
1.
Falling forward when bus brakes to a stop (Inertia of Motion):
•
When a bus is travelling at uniform velocity, the passenger's whole body is also moving forward at the same speed.
•
When brakes are applied, the bus and the passenger's feet in contact with the floor come to an immediate halt due to friction.
•
However, the upper part of the passenger's body tends to continue moving forward due to Inertia of Motion, causing the passenger to lurch forward.
2.
Falling backward when bus accelerates from rest (Inertia of Rest):
•
When the bus is stationary, the passenger's body is at rest.
•
When the bus suddenly accelerates forward, the lower body moves forward along with the bus floor.
•
However, the upper body tends to remain in its original position due to Inertia of Rest, causing the passenger to fall backward relative to the bus.
📌 In-Text (Page 94) ✓ 100/100 Step Marks Format

If action is always equal to the reaction, explain how a horse can pull a cart.

✓ Step-by-Step Textbook Solution
1.
Action and reaction forces act on two different bodies simultaneously, so they never cancel each other out.
2.
To move forward, the horse bends forward and pushes the ground backwards with its hooves at an angle (Action force on the ground).
3.
According to Newton's Third Law, the ground exerts an equal and opposite reaction force forward on the horse's hooves (Reaction force on the horse).
4.
The horizontal component of this forward ground reaction force pushes the horse forward.
5.
When this forward horizontal reaction force exceeds the opposing friction force between the cart wheels and the ground, an unbalanced net forward force acts on the horse-cart system, causing the cart to accelerate forward.
📌 In-Text (Page 94) ✓ 100/100 Step Marks Format

Explain why it is difficult for a fireman to hold a hose, which ejects large amounts of water at a high velocity.

✓ Step-by-Step Textbook Solution
1.
A fire hose ejects a massive stream of water with extraordinarily high mass flow rate and very high velocity, resulting in a large forward momentum of exiting water.
2.
According to Newton's Third Law of Motion (and the Principle of Conservation of Momentum), to every action there is an equal and opposite reaction.
3.
As water is forced forward with enormous force (Action), it exerts an equal and opposite backwards reaction force (recoil thrust) on the nozzle of the hose.
4.
This massive backward thrust pushes the hose vigorously backward and makes it unstable and extremely difficult for a single firefighter to hold without losing balance.
📌 In-Text (Page 94 - Numerical) ✓ 100/100 Step Marks Format

From a rifle of mass 4 kg, a bullet of mass 50 g is fired with an initial velocity of 35 m/s. Calculate the initial recoil velocity of the rifle.

✓ Step-by-Step Textbook Solution
Given:
•
Mass of rifle (m₁) = 4 kg
•
Mass of bullet (m₂) = 50 g = 50 / 1000 kg = 0.05 kg
•
Initial velocity of rifle and bullet before firing: u₁ = 0, u₂ = 0
•
Muzzle velocity of bullet (v₂) = +35 m/s (forward direction)
•
Let recoil velocity of rifle = v₁

Formula (Conservation of Momentum):

Total momentum before firing = Total momentum after firing

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

0 + 0 = (4 × v₁) + (0.05 × 35)

Calculation:

4 v₁ + 1.75 = 0

4 v₁ = -1.75

v₁ = -1.75 / 4 = -0.4375 m/s

✅ Final Answer / Conclusion: The initial recoil velocity of the rifle is -0.4375 m/s (or -0.44 m/s). The negative sign indicates that the rifle moves in the backward direction opposite to the bullet's motion.
📌 In-Text (Page 94 - Numerical) ✓ 100/100 Step Marks Format

Two objects of masses 100 g and 200 g are moving along the same line and direction with velocities of 2 m/s and 1 m/s respectively. They collide and after the collision, the first object moves at a velocity of 1.67 m/s. Determine the velocity of the second object.

✓ Step-by-Step Textbook Solution
📊 Law of Conservation of Momentum (Collision of Two Masses)
BEFORE COLLISION: m₁ u₁ m₂ u₂ (u₁ > u₂) DURING COLLISION: m₁ m₂ F₁₂ = -F₂₁ (Action = -Reaction) AFTER COLLISION: m₁ v₁ m₂ v₂ m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
NCERT Fig. 8.14: Conservation of total linear momentum in an isolated system during impact.
Given:
•
Mass of first object (m₁) = 100 g = 0.1 kg
•
Mass of second object (m₂) = 200 g = 0.2 kg
•
Initial velocity of first object (u₁) = 2 m/s
•
Initial velocity of second object (u₂) = 1 m/s
•
Final velocity of first object after collision (v₁) = 1.67 m/s
•
Final velocity of second object (v₂) = ?

Formula (Law of Conservation of Linear Momentum):

m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂

Calculation:

(0.1 × 2) + (0.2 × 1) = (0.1 × 1.67) + (0.2 × v₂)

0.
2 + 0.2 = 0.167 + 0.2 v₂
0.
4 = 0.167 + 0.2 v₂
0.
2 v₂ = 0.4 - 0.167
0.
2 v₂ = 0.233

v₂ = 0.233 / 0.2 = 1.165 m/s

✅ Final Answer / Conclusion: The velocity of the second object after collision is 1.165 m/s in the same direction.
📌 Exercises (Q5 - Numerical) ✓ 100/100 Step Marks Format

A truck starts from rest and rolls down a hill with a constant acceleration. It travels a distance of 400 m in 20 s. Find its acceleration. Find the force acting on it if its mass is 7 tonnes (Hint: 1 tonne = 1000 kg).

✓ Step-by-Step Textbook Solution
Given:
•
Initial velocity (u) = 0 m/s (starts from rest)
•
Distance travelled (s) = 400 m
•
Time taken (t) = 20 s
•
Mass of truck (m) = 7 tonnes = 7 × 1000 kg = 7000 kg

Part 1: Find acceleration (a):

Using Second Equation of Motion: s = ut + (1/2)at²

400 = (0 × 20) + (1/2 × a × (20)²)

400 = 0 + (1/2 × a × 400)

400 = 200 a

a = 400 / 200 = 2 m/s²

Part 2: Find Force acting on truck (F):

Using Newton's Second Law: F = m × a

F = 7000 kg × 2 m/s² = 14,000 N (or 14 kN)

✅ Final Answer / Conclusion: • Acceleration of truck = 2 m/s²
•
Force acting on truck = 14,000 N.
📌 Exercises (Q6 - Numerical) ✓ 100/100 Step Marks Format

A stone of 1 kg is thrown with a velocity of 20 m/s across the frozen surface of a lake and comes to rest after travelling a distance of 50 m. What is the force of friction between the stone and the ice?

✓ Step-by-Step Textbook Solution
Given:
•
Mass of stone (m) = 1 kg
•
Initial velocity (u) = 20 m/s
•
Final velocity (v) = 0 m/s (comes to rest)
•
Distance travelled (s) = 50 m

Part 1: Find acceleration (a):

Using Third Equation of Motion: v² = u² + 2as

0² = (20)² + (2 × a × 50)

0 = 400 + 100 a

100 a = -400

a = -400 / 100 = -4 m/s²

Part 2: Find Force of friction (F):

Using Newton's Second Law: F = m × a

F = 1 kg × (-4 m/s²) = -4 N

✅ Final Answer / Conclusion: The force of friction between the stone and the ice is 4 N. (The negative sign indicates that friction opposes the motion of the stone).
Chapter 9 Physics 10 Complete Solutions

9. Gravitation

Universal Law of Gravitation, acceleration due to gravity (g), free fall, equations of motion under gravity, mass vs weight, weight on moon (1/6th), thrust and pressure, buoyant force, Archimedes' Principle, and relative density.

📘 Chapter 9: Gravitation Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Universal Law of Gravitation (Newton's Inverse Square Law)
M Object A (Mass M) m Object B (Mass m) Distance (d) F F F = G · (M·m / d²)
NCERT Fig. 9.2: Mutual attractive gravitational force between two masses separated by distance d.
Universal Law of Gravitation
Sir Isaac Newton: Every object in the universe attracts every other object with a force directly proportional to the product of their masses and inversely proportional to the square of the distance between their centres: F = G(M·m / d²). G = Universal Gravitational Constant = 6.673 × 10⁻¹¹ N·m²/kg² (SI unit).
Acceleration due to Gravity (g)
Acceleration acquired by a freely falling body due to Earth's gravitational pull: g = GM / R² ≈ 9.8 m/s² (on Earth's surface). Value of g is higher at poles (smaller radius R) and lower at the equator (larger radius R). g decreases as altitude increases and inside Earth.
Equations of Motion under Gravity
For upward throw (a = -g, reaches max height where v = 0): 1. v = u - gt | 2. h = ut - (1/2)gt² | 3. v² = u² - 2gh. For downward drop (starts from rest u = 0, a = +g): 1. v = gt | 2. h = (1/2)gt² | 3. v² = 2gh.
Mass vs Weight
Mass: Inherent measure of matter/inertia (scalar, constant everywhere in universe, SI unit kg). Weight: Gravitational force with which Earth attracts an object: W = m × g (vector, varies with location, SI unit Newton N). Weight on Moon = (1/6) × Weight on Earth (since g_moon = g_earth / 6).
Thrust and Pressure
Thrust: Force acting perpendicular to a surface (unit N). Pressure = Thrust / Area = F / A (SI unit Pascal Pa = N/m²). Smaller contact area generates larger pressure (sharp knife, needle point).
Archimedes' Principle & Buoyancy
Buoyant Force (Upthrust): Upward force exerted by a fluid on an immersed body = Weight of fluid displaced. Archimedes' Principle: An object fully or partially immersed in a fluid experiences an upward buoyant force equal to the weight of fluid displaced by it. Applications: Ships float, Submarines dive/surface, Lactometers, Hydrometers.
🎯 Rohit Sir's Concept Breakdown: G aur g me farak: 'G' Universal Constant hai jo poore universe me kabhi change nahi hota (6.67 × 10⁻¹¹ N m²/kg²). 'g' Acceleration due to gravity hai jo planet to planet aur location to location change hota hai (Earth par 9.8 m/s², Moon par 1.63 m/s²).
⚠️ Common Exam Trap Radar: Numerical trap: Agar question me 'A stone is dropped' likha ho to u = 0. Agar 'A stone is thrown vertically upwards' likha ho to top point par v = 0 aur upward journey me a = -9.8 m/s² lena zaroori hai!
⚡ Topper's Quick Calculation / Memory Trick: Moon par Mass same rehta hai, sirf Weight 1/6th hota hai! Agar Earth par mass 60 kg hai, to Moon par bhi mass 60 kg hi hoga, lekin weight 60 × 9.8 / 6 = 98 N ho jayega!
📌 In-Text (Page 102) ✓ 100/100 Step Marks Format

State the universal law of gravitation.

✓ Step-by-Step Textbook Solution
📊 Universal Law of Gravitation (Newton's Inverse Square Law)
M Object A (Mass M) m Object B (Mass m) Distance (d) F F F = G · (M·m / d²)
NCERT Fig. 9.2: Mutual attractive gravitational force between two masses separated by distance d.

Statement of Newton's Universal Law of Gravitation:

"Every object in the universe attracts every other object with a force which is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centres."

Mathematical Formulation:

Let two objects A and B of masses M and m be separated by distance d.

1.
F ∝ (M × m) [Directly proportional to product of masses]
2.
F ∝ (1 / d²) [Inversely proportional to square of distance]

Combining both relations:

F = G (M · m / d²)

where G is the Universal Gravitational Constant.

Value of G = 6.673 × 10⁻¹¹ N·m²/kg².

📌 In-Text (Page 102) ✓ 100/100 Step Marks Format

Write the formula to find the magnitude of the gravitational force between the earth and an object on the surface of the earth.

✓ Step-by-Step Textbook Solution

Let:

•
Mass of the Earth = M
•
Mass of the object on the surface = m
•
Radius of the Earth = R (distance from Earth's centre to object)
•
Universal Gravitational Constant = G
Formula:

The magnitude of gravitational force is given by:

F = G (M · m / R²)

(This force represents the Weight of the object: W = mg, where g = GM/R²).

📌 In-Text (Page 104) ✓ 100/100 Step Marks Format

What do you mean by free fall?

✓ Step-by-Step Textbook Solution
1.
When an object falls towards the Earth solely under the influence of Earth's gravitational force, with no other forces (such as air resistance) acting upon it, the object is said to be in Free Fall.
2.
Key Characteristics of Free Fall:
•
Initial velocity when dropped = 0 m/s.
•
Direction of motion remains strictly vertical downward towards Earth's centre.
•
The acceleration experienced by the falling object is independent of its mass, size, or shape and is equal to the acceleration due to gravity (g = 9.8 m/s² on Earth).
•
An object in free fall experiences apparent weightlessness.
📌 In-Text (Page 104) ✓ 100/100 Step Marks Format

What do you mean by acceleration due to gravity?

✓ Step-by-Step Textbook Solution
1.
Acceleration due to gravity (g) is the uniform acceleration acquired by an object falling freely towards a planet (Earth) under the influence of its gravitational attraction.
2.
Characteristics:
•
It is a vector quantity directed toward the center of the Earth.
•
SI Unit: metre per second squared (m/s²).
•
Formula: g = GM / R² (where M = mass of Earth, R = radius of Earth).
•
Standard average value on Earth's surface = 9.8 m/s² (approx 9.81 m/s²).
•
It is independent of the mass of the falling object (a feather and an iron ball fall with identical acceleration in vacuum).
📌 In-Text (Page 107) ✓ 100/100 Step Marks Format

What are the differences between the mass of an object and its weight?

✓ Step-by-Step Textbook Solution

Comparison of Mass and Weight:

1.
Definition:
•
Mass: Measure of the quantity of matter contained within an object (also a measure of its inertia).
•
Weight: Gravitational force with which the Earth attracts the object towards its center (W = m × g).
2.
Nature of Quantity:
•
Mass: Scalar quantity (has only magnitude).
•
Weight: Vector quantity (has magnitude and acts vertically downwards).
3.
Variation with Location:
•
Mass: Constant everywhere in the universe (remains identical on Earth, Moon, or in deep space).
•
Weight: Variable; changes from place to place as acceleration due to gravity (g) varies.
4.
Value at Centre of Earth / Deep Space:
•
Mass: Can never be zero.
•
Weight: Can be zero (at centre of Earth where g = 0, or in free fall/weightlessness).
5.
SI Unit:
•
Mass: kilogram (kg).
•
Weight: Newton (N) [since it is a force].
6.
Measuring Device:
•
Mass: Beam balance or physical pan balance.
•
Weight: Spring balance.
📌 In-Text (Page 107) ✓ 100/100 Step Marks Format

Why is the weight of an object on the moon 1/6th its weight on the earth?

✓ Step-by-Step Textbook Solution
1.
Weight of an object depends directly on acceleration due to gravity: W = m × g.
2.
Acceleration due to gravity on any celestial body is given by g = GM / R².
3.
Celestial parameters comparison:
•
Mass of Earth (M_e) = 5.98 × 10²⁴ kg | Radius of Earth (R_e) = 6.37 × 10⁶ m
•
Mass of Moon (M_m) = 7.36 × 10²² kg (approx 1/100th of Earth)
•
Radius of Moon (R_m) = 1.74 × 10⁶ m (approx 1/4th of Earth)
4.
Ratio calculation:

g_moon / g_earth = (G M_m / R_m²) / (G M_e / R_e²) = (M_m / M_e) × (R_e / R_m)²

g_moon / g_earth = (7.36 × 10²² / 5.98 × 10²⁴) × ((6.37 × 10⁶) / (1.74 × 10⁶))²

g_moon / g_earth ≈ 0.0123 × (3.66)² ≈ 0.0123 × 13.4 ≈ 0.165 ≈ 1/6

5.
Therefore, g_moon = (1/6) g_earth.
6.
Consequently, Weight on Moon W_m = m × g_moon = m × ((1/6) g_earth) = (1/6) Weight on Earth.
📌 In-Text (Page 109) ✓ 100/100 Step Marks Format

Why is it difficult to hold a school bag having a strap made of a thin and strong string?

✓ Step-by-Step Textbook Solution
1.
Pressure is defined as the force (thrust) applied per unit surface area: Pressure = Thrust / Area (P = F / A).
2.
The total downward force (weight of the school bag and heavy books) is constant.
3.
A thin string strap has an extremely small contact surface area (A is very small).
4.
Since pressure is inversely proportional to surface area (P ∝ 1/A), this tiny contact area generates a massive localized pressure on the shoulder skin and muscles.
5.
This intense pressure penetrates into tissues and causes acute pain, making it very difficult to carry the bag.

(In contrast, broad padded straps distribute the same weight over a large area, dramatically reducing pressure).

📌 In-Text (Page 109) ✓ 100/100 Step Marks Format

What do you mean by buoyancy?

✓ Step-by-Step Textbook Solution
1.
When an object is partially or wholly submerged in a liquid (or any fluid), the fluid exerts an upward resultant force on the object.
2.
This upward force exerted by the fluid opposing gravity is called the Buoyant Force or Upthrust.
3.
The natural tendency of a fluid to exert this upward force on an immersed object is called Buoyancy.
4.
Cause of Buoyancy: Pressure in a fluid increases with depth (P = hρg). Hence, the upward pressure acting on the bottom of the submerged object is greater than the downward pressure on its top. This pressure difference creates a net upward force.
📌 In-Text (Page 109) ✓ 100/100 Step Marks Format

Why does an object float or sink when placed on the surface of water?

✓ Step-by-Step Textbook Solution

An object floats or sinks based on the comparison of its density with the density of water (1000 kg/m³), which determines the balance between gravity and buoyant force:

1.
Object Sinks (Density of Object > Density of Water):
•
If the average density of the object is greater than the density of water, the downward gravitational force (weight of object) is greater than the maximum upward buoyant force exerted by water.
•
The net downward force causes the object to sink to the bottom (e.g., an iron nail).
2.
Object Floats (Density of Object < Density of Water):
•
If the average density of the object is less than or equal to the density of water, the buoyant force is sufficient to balance the weight of the object.
•
Hence, the object floats on the surface of water (e.g., cork, wood, empty plastic bottle, hollow iron ship).
📌 Exercises (Q14 - Numerical) ✓ 100/100 Step Marks Format

A stone is released from the top of a tower of height 19.6 m. Calculate its final velocity just before touching the ground. (Take g = 9.8 m/s²).

✓ Step-by-Step Textbook Solution
Given:
•
Initial velocity (u) = 0 m/s (released from rest)
•
Height of tower (h or s) = 19.6 m
•
Acceleration due to gravity (a = +g) = +9.8 m/s² (downward motion)
•
Final velocity just before touching ground (v) = ?

Formula (Third Equation of Motion):

v² = u² + 2gh

Calculation:

v² = 0² + 2 × (9.8) × (19.6)

v² = 0 + 19.6 × 19.6 = (19.6)²

Taking square root on both sides:

v = 19.6 m/s

✅ Final Answer / Conclusion: The final velocity of the stone just before touching the ground is 19.6 m/s.
Chapter 10 Physics 10 Complete Solutions

10. Work and Energy

Scientific conception of work (W = F·s), positive/zero/negative work, kinetic energy (Ek = 1/2 mv²) derivation, potential energy (Ep = mgh) derivation, Law of Conservation of Energy, power (P = W/t), and commercial unit of energy (kWh).

📘 Chapter 10: Work and Energy Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Law of Conservation of Energy (Oscillating Pendulum)
A PE = Max (mgh) KE = 0 B KE = Max (½mv²) PE = 0 (Datum) C PE = Max (mgh) KE = 0 TOTAL MECHANICAL ENERGY = PE + KE = CONSTANT
NCERT Fig. 10.6: Continuous conversion between potential and kinetic energy without net loss.
Scientific Definition of Work
Work is done only when: 1. A force acts on an object. 2. The object undergoes displacement in the direction of the force. W = F × s × cos θ. If θ = 0° (same direction): W = F × s. SI Unit: Joule (J) = 1 Newton × 1 metre (N·m). 1 Joule is work done when a force of 1 N moves an object through 1 m in its direction.
Types of Work
• Positive Work: Force and displacement in same direction (θ = 0°, W = +F·s). E.g. pulling a cart. • Negative Work: Force opposes displacement (θ = 180°, W = -F·s). E.g. friction acting on a moving vehicle, gravity on a ball thrown upwards. • Zero Work: Force perpendicular to displacement (θ = 90°, cos 90° = 0) OR displacement is zero. E.g. coolie carrying load on head on horizontal platform, satellite in circular orbit.
Kinetic Energy (Ek)
Energy possessed by a body due to its motion: Ek = (1/2) m v² (Joule). Derivation: W = F·s = (ma) · ((v² - u²)/2a) = (1/2)m(v² - u²). For object starting from rest (u = 0), Ek = (1/2) m v².
Potential Energy (Ep)
Energy possessed by an object due to its position, configuration, or state of strain. Gravitational Potential Energy at height h: Ep = m · g · h (Joule).
Law of Conservation of Energy
Energy can neither be created nor destroyed; it can only be transformed from one form to another. Total mechanical energy E = Ek + Ep = constant during free fall.
Power & Commercial Unit
Power is the rate of doing work or rate of energy consumption: P = W / t = E / t. SI Unit: Watt (W) = 1 Joule / second (J/s). 1 kW = 1000 W. Commercial unit of electrical energy: 1 kilowatt-hour (1 kWh) = 1 Unit = 1000 W × 3600 s = 3.6 × 10⁶ Joules.
🎯 Rohit Sir's Concept Breakdown: Agar displacement force ke perpendicular ho (jaise coolie apne sar par bojh rakh kar horizontal road par chal raha hai), to gravitational force ke dwara kiya gaya work ZERO hota hai kyunki angle 90° hai (W = mg × s × cos 90° = 0)! Lekin agar coolie seedhiyon (stairs) par chadhega, to work done = mgh hoga!
⚠️ Common Exam Trap Radar: Examiner's trap: Kinetic energy velocity ke square par depend karti hai (Ek ∝ v²). Agar speed double ho jaye, to Kinetic Energy 4 guna (4 times) ho jati hai, 2 guna nahi! Agar speed triple ho jaye, to KE 9 guna ho jati hai!
⚡ Topper's Quick Calculation / Memory Trick: Commercial electricity bill calculation: Units (kWh) = (Total Watts × Hours per day × Days) / 1000. Total Cost = Units × Rate per unit!
📌 In-Text (Page 115) ✓ 100/100 Step Marks Format

A force of 7 N acts on an object. The displacement is, say 8 m, in the direction of the force. Let us take it that the force acts on the object through the displacement. What is the work done in this case?

✓ Step-by-Step Textbook Solution
Given:
•
Force applied (F) = 7 N
•
Displacement (s) = 8 m (in the direction of force)
Formula:

Work done (W) = Force (F) × Displacement (s)

Calculation:

W = 7 N × 8 m = 56 N·m = 56 J

✅ Final Answer / Conclusion: The work done in this case is 56 Joules (56 J).
📌 In-Text (Page 117) ✓ 100/100 Step Marks Format

When do we say that work is done?

✓ Step-by-Step Textbook Solution

In physics, work is said to be done if and only if two mandatory conditions are simultaneously satisfied:

1.
An external force must act on the object.
2.
The object must undergo displacement (movement) from its original position as a result of that applied force (displacement s ≠ 0 and not perpendicular to force).

(If a person pushes a massive brick wall for hours and exhausts themselves, but the wall does not move, s = 0, so Work Done = 0 in the scientific sense).

📌 In-Text (Page 117) ✓ 100/100 Step Marks Format

Write an expression for the work done when a force is acting on an object in the direction of its displacement.

✓ Step-by-Step Textbook Solution
1.
Expression:

Work Done (W) = Force (F) × Displacement (s)

W = F · s

2.
Where:
•
W = Work done (measured in Joules, J)
•
F = Applied force (measured in Newtons, N)
•
s = Displacement of the object in the direction of force (measured in metres, m).
📌 In-Text (Page 117) ✓ 100/100 Step Marks Format

Define 1 J of work.

✓ Step-by-Step Textbook Solution
1.
Definition of 1 Joule (1 J):

1 Joule is the amount of work done on an object when an applied force of 1 Newton (1 N) displaces the object by a distance of 1 metre (1 m) along the line of action of the force.

2.
Mathematical equation: 1 J = 1 N × 1 m = 1 N·m = 1 kg·m²/s².
📌 In-Text (Page 117 - Numerical) ✓ 100/100 Step Marks Format

A pair of bullocks exerts a force of 140 N on a plough. The field being ploughed is 15 m long. How much work is done in ploughing the length of the field?

✓ Step-by-Step Textbook Solution
📊 Law of Conservation of Energy (Oscillating Pendulum)
A PE = Max (mgh) KE = 0 B KE = Max (½mv²) PE = 0 (Datum) C PE = Max (mgh) KE = 0 TOTAL MECHANICAL ENERGY = PE + KE = CONSTANT
NCERT Fig. 10.6: Continuous conversion between potential and kinetic energy without net loss.
Given:
•
Applied force by bullocks (F) = 140 N
•
Displacement along field (s) = 15 m
Formula:

Work done (W) = Force (F) × Displacement (s)

Calculation:

W = 140 N × 15 m

W = 2100 J (or 2.1 kJ)

✅ Final Answer / Conclusion: The work done in ploughing the field is 2100 Joules (or 2.1 kJ).
📌 In-Text (Page 120) ✓ 100/100 Step Marks Format

What is the kinetic energy of an object?

✓ Step-by-Step Textbook Solution
1.
Definition: Kinetic energy (Ek) is the energy possessed by an object by virtue of its state of motion.
2.
Physical meaning: It represents the total amount of mechanical work done on the object to accelerate it from its state of rest to its current velocity.
3.
Mathematical formula: Ek = (1/2) m v²

(where m = mass of the object in kg, v = velocity of the object in m/s).

4.
SI Unit: Joule (J).
5.
Examples: A speeding bullet, blowing wind rotating a windmill, flowing river water turning a turbine.
📌 In-Text (Page 120 - Numerical) ✓ 100/100 Step Marks Format

The kinetic energy of an object of mass, m moving with a velocity of 5 m/s is 25 J. What will be its kinetic energy when its velocity is doubled? What will be its kinetic energy when its velocity is increased three times?

✓ Step-by-Step Textbook Solution
Given:
•
Initial velocity (v₁) = 5 m/s
•
Initial Kinetic Energy (Ek₁) = 25 J
Step 1: Find mass (m) of the object:

Ek = (1/2) m v²

25 = (1/2) × m × (5)² = (25/2) m

m = (25 × 2) / 25 = 2 kg

Step 2: When velocity is doubled (v₂ = 2 × 5 = 10 m/s):

Ek₂ = (1/2) m (v₂)² = (1/2) × 2 × (10)² = 100 J

(Note: Since Ek ∝ v², doubling velocity increases KE by 2² = 4 times: 25 × 4 = 100 J).

Step 3: When velocity is increased three times (v₃ = 3 × 5 = 15 m/s):

Ek₃ = (1/2) m (v₃)² = (1/2) × 2 × (15)² = 225 J

(Note: Tripling velocity increases KE by 3² = 9 times: 25 × 9 = 225 J).

✅ Final Answer / Conclusion: • Kinetic energy when velocity is doubled = 100 J
•
Kinetic energy when velocity is tripled = 225 J.
📌 In-Text (Page 124) ✓ 100/100 Step Marks Format

What is power?

✓ Step-by-Step Textbook Solution
1.
Power is defined as the rate of doing work, or the rate of transfer/consumption of energy per unit time.
2.
Mathematical formula: Power (P) = Work Done (W) / Time taken (t) = Energy (E) / t
3.
SI Unit: Watt (W) in honor of James Watt. 1 Watt = 1 Joule per second (1 J/s).
4.
Higher units: 1 kilowatt (kW) = 1000 W; 1 Horsepower (hp) = 746 W.
📌 In-Text (Page 124) ✓ 100/100 Step Marks Format

Define 1 watt of power.

✓ Step-by-Step Textbook Solution
1.
Definition of 1 Watt (1 W):

1 Watt is the power of an appliance or agent which does work at the rate of 1 Joule per second (or consumes energy at the rate of 1 Joule per second).

2.
Mathematical relation: 1 W = (1 Joule) / (1 second) = 1 J/s.
📌 In-Text (Page 124 - Numerical) ✓ 100/100 Step Marks Format

A lamp consumes 1000 J of electrical energy in 10 s. What is its power?

✓ Step-by-Step Textbook Solution
Given:
•
Electrical energy consumed (W or E) = 1000 J
•
Time taken (t) = 10 s
Formula:

Power (P) = Energy consumed (E) / Time taken (t)

Calculation:

P = 1000 J / 10 s = 100 J/s = 100 W

✅ Final Answer / Conclusion: The power of the lamp is 100 Watts (100 W).
Chapter 11 Physics 10 Complete Solutions

11. Sound

Production & propagation of sound, mechanical longitudinal waves (compressions & rarefactions), wave characteristics (wavelength, frequency, amplitude, speed v = νλ), speed in media, reflection of sound, echo calculation, reverberation, ultrasound, SONAR, and human ear.

📘 Chapter 11: Sound Quick Formula & Concept Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 Longitudinal Sound Wave (Compressions, Rarefactions & Wave Anatomy)
Air Particle Density: C R C R C Density / Pressure Wavelength (λ) Amplitude (A) Crest (Compression) Trough (Rarefaction) Wave Equation: v = ν × λ (Speed = Frequency × Wavelength)
NCERT Fig. 11.8: Graphical representation of density and pressure variations in a sound wave.
Nature of Sound Waves
Sound is mechanical energy produced by vibrating bodies. It requires a material medium (solid, liquid, gas) for propagation and CANNOT travel through vacuum. It is a Longitudinal Wave (particles oscillate parallel to direction of wave propagation), creating alternating high-density Compressions (C) and low-density Rarefactions (R).
Wave Characteristics & Formula
• Wavelength (λ): Distance between two consecutive compressions or rarefactions (unit: metre m). • Frequency (ν or f): Number of complete oscillations/cycles per second (unit: Hertz Hz = s⁻¹). • Time Period (T): Time taken for one complete oscillation: T = 1 / ν (unit: second s). • Wave Speed Formula: Speed = Wavelength / Time Period ⇒ v = ν × λ. • Amplitude (A): Maximum displacement from mean position. Determines Loudness (Loudness ∝ Amplitude²). • Frequency determines Pitch (shrilness).
Speed of Sound in Media
Speed depends on density and elasticity of medium: Speed in Solids > Speed in Liquids > Speed in Gases (e.g. Steel ~ 5960 m/s > Water ~ 1498 m/s > Air ~ 344 m/s at 22°C). Speed increases with increase in temperature.
Echo & Reverberation
Echo: Sensation of sound persists in brain for 0.1 s (persistence of hearing). To hear distinct echo, reflected sound must reach ear after at least 0.1 s. Minimum distance from reflecting surface in air at 22°C: d = (v × t) / 2 = (344 × 0.1) / 2 = 17.2 m. Reverberation: Repeated reflection resulting in persistence of sound in an enclosed hall. Reduced by sound-absorbent materials (curtains, carpets, porous acoustic tiles).
Audible Range & Ultrasound
• Infrasonic sound: Frequency < 20 Hz (whales, elephants, earthquakes, rhinos). • Audible human range: 20 Hz to 20,000 Hz (20 kHz). • Ultrasonic sound: Frequency > 20,000 Hz (bats, dolphins, dogs, porpoises). • Ultrasound Applications: Flaw detection in metal castings, Echocardiography (heart imaging), Ultrasonography (internal organs), lithotripsy (kidney stone breaking), SONAR (Sound Navigation and Ranging: 2d = v × t).
🎯 Rohit Sir's Concept Breakdown: Echo ke numericals me sound jati hai aur wapas aati hai, isliye total distance travelled = 2d hota hai! Formula: 2d = v × t ⇒ d = (v × t) / 2. Agar ek aadmi clap bajata hai aur 2 second baad echo sunta hai, to d = (340 × 2) / 2 = 340 m hoga!
⚠️ Common Exam Trap Radar: Examiner's trap: 'Why can sound not be heard on the Moon?' - Answer: Moon par atmosphere (air) nahi hai (vacuum hai). Sound ek mechanical wave hai jise travel karne ke liye material medium ki zaroorat hoti hai. Isliye astronauts radio waves (electromagnetic waves) se baat karte hain!
⚡ Topper's Quick Calculation / Memory Trick: Wave equation v = νλ: Agar speed v constant hai aur frequency double ho jaye, to wavelength aadhi (half) ho jayegi!
📌 In-Text (Page 129) ✓ 100/100 Step Marks Format

How does the sound produced by a vibrating object in a medium reach your ear?

✓ Step-by-Step Textbook Solution
📊 Longitudinal Sound Wave (Compressions, Rarefactions & Wave Anatomy)
Air Particle Density: C R C R C Density / Pressure Wavelength (λ) Amplitude (A) Crest (Compression) Trough (Rarefaction) Wave Equation: v = ν × λ (Speed = Frequency × Wavelength)
NCERT Fig. 11.8: Graphical representation of density and pressure variations in a sound wave.
1.
When an object vibrates (e.g., a tuning fork prong), it exerts a force on the particles of the surrounding medium immediately in contact with it.
2.
As the vibrating prong pushes forward, it compresses the air in front of it, creating a high-pressure and high-density region called a Compression (C).
3.
When the prong moves backward, it creates a low-pressure and low-density region called a Rarefaction (R).
4.
These disturbed particles do not travel all the way from the source to the ear; instead, they oscillate back and forth about their equilibrium positions, transferring energy and momentum to neighboring particles.
5.
This disturbance propagates through the medium as a series of compressions and rarefactions until it impinges on the tympanic membrane (eardrum) of the ear, setting it into vibration and creating the sensation of sound.
📌 In-Text (Page 130) ✓ 100/100 Step Marks Format

Explain how sound is produced by your school bell.

✓ Step-by-Step Textbook Solution
1.
When a school bell is struck with a hammer, mechanical energy is transferred to the bronze/brass metal of the bell.
2.
This mechanical blow causes the thin metal body of the bell to vibrate vigorously back and forth at high frequency (you can feel these vibrations by lightly touching the ringing bell).
3.
The vibrating bell surfaces repeatedly push and compress adjacent air molecules forward (creating compressions) and pull back (creating rarefactions).
4.
This sets up a longitudinal sound wave in the surrounding air which radiates outwards in all directions and reaches our ears.
📌 In-Text (Page 130) ✓ 100/100 Step Marks Format

Why are sound waves called mechanical waves?

✓ Step-by-Step Textbook Solution
1.
Sound waves are called mechanical waves because they strictly require a material medium (solid, liquid, or gas) possessing inertia and elasticity for their propagation.
2.
Propagation mechanism: Sound propagates via physical collisions, mechanical displacement, and elastic restitution of the particles of the medium.
3.
Crucial proof: In the absence of a physical material medium (i.e. in vacuum, such as in outer space or inside an evacuated bell jar), sound cannot travel at all.

(In contrast, electromagnetic waves like light do not require a material medium).

📌 In-Text (Page 130) ✓ 100/100 Step Marks Format

Suppose you and your friend are on the moon. Will you be able to hear any sound produced by your friend?

✓ Step-by-Step Textbook Solution
1.
No, you will not be able to hear any sound produced by your friend on the Moon.
2.
Reason: Sound is a mechanical longitudinal wave that requires a material medium (like air) for its propagation through molecular compressions and rarefactions.
3.
The Moon lacks an atmosphere; it has complete vacuum on its surface.
4.
In a vacuum, there are no particles to transmit the mechanical vibrations from your friend's vocal cords to your ears.

(Astronauts on the Moon communicate using radio headsets, because radio waves are electromagnetic waves that travel freely through vacuum).

📌 In-Text (Page 133) ✓ 100/100 Step Marks Format

Which wave property determines (a) loudness, (b) pitch?

✓ Step-by-Step Textbook Solution

(a) Loudness is determined by the Amplitude of the sound wave.

•
Loudness is directly proportional to the square of amplitude (Loudness ∝ Amplitude²).
•
A wave with greater amplitude carries more acoustic energy and sounds loud, whereas a small amplitude wave sounds soft/faint.

(b) Pitch (shrillness) is determined by the Frequency of the sound wave.

•
Higher frequency corresponds to a higher pitch (shrill sound, e.g., a woman's voice, whistling, violin).
•
Lower frequency corresponds to a lower pitch (grave/bass sound, e.g., a man's deep voice, drum beat).
📌 In-Text (Page 133 - Numerical) ✓ 100/100 Step Marks Format

A sound wave has a frequency of 2 kHz and wave length 35 cm. How long will it take to travel 1.5 km?

✓ Step-by-Step Textbook Solution
Given:
•
Frequency (ν) = 2 kHz = 2 × 1000 Hz = 2000 Hz
•
Wavelength (λ) = 35 cm = 35 / 100 m = 0.35 m
•
Distance to travel (s) = 1.5 km = 1.5 × 1000 m = 1500 m
Step 1: Calculate speed of sound wave (v):
Formula: Speed (v) = Frequency (ν) × Wavelength (λ)

v = 2000 Hz × 0.35 m = 700 m/s

Step 2: Calculate time taken (t):
Formula: Time (t) = Distance (s) / Speed (v)

t = 1500 m / 700 m/s

t = 15 / 7 ≈ 2.14 s

✅ Final Answer / Conclusion: The sound wave will take 2.14 seconds to travel 1.5 km.
📌 In-Text (Page 134) ✓ 100/100 Step Marks Format

What is the audible range of the average human ear?

✓ Step-by-Step Textbook Solution
📊 Anatomy of Human Ear (Auditory Mechanism)
Pinna Auditory Canal Eardrum 3 Bones (Malleus, Incus, Stapes) (Amplify Sound Pressure) Cochlea (Fluid Converts to Signals) Auditory Nerve ➔ To Brain (Hearing perception) OUTER EAR MIDDLE EAR INNER EAR
NCERT Fig. 11.19: Complete acoustic hearing pathway from Pinna to Cochlea and Auditory Nerve.
1.
The audible frequency range for an average normal human ear is from 20 Hz to 20,000 Hz (or 20 Hz to 20 kHz).
2.
Sounds with frequencies below 20 Hz are termed Infrasound (infrasonic).
3.
Sounds with frequencies above 20,000 Hz are termed Ultrasound (ultrasonic).

(Children under 5 years and dogs can hear up to 25 kHz).

📌 In-Text (Page 135 - Numerical) ✓ 100/100 Step Marks Format

An echo is heard in 3 s. What is the distance of the reflecting surface from the source, given that the speed of sound is 342 m/s?

✓ Step-by-Step Textbook Solution
Given:
•
Time taken to hear echo (t) = 3 s
•
Speed of sound in air (v) = 342 m/s

Principle:

In an echo, the sound travels from the source to the reflecting obstacle and then reflects back to the observer, covering a total distance of 2d.

Formula:

Total Distance (2d) = Speed (v) × Time (t)

Distance (d) = (v × t) / 2

Calculation:

d = (342 × 3) / 2

d = 1026 / 2 = 513 m

✅ Final Answer / Conclusion: The distance of the reflecting surface from the source is 513 m.
📌 In-Text (Page 136) ✓ 100/100 Step Marks Format

What is reverberation? How can it be reduced?

✓ Step-by-Step Textbook Solution
1.
Definition of Reverberation:

Reverberation is the persistence of sound in a big enclosed hall or auditorium as a result of repeated multiple reflections of sound waves from walls, ceiling, and floor even after the source has stopped producing sound.

If reverberation is excessively long, sound overlaps and becomes blurred, distorted, and unintelligible.

2.
Methods to Reduce Reverberation:

Reverberation is reduced by installing sound-absorbing materials inside the hall:

•
Covering walls and ceilings with sound-absorbent acoustic materials such as compressed fireboard, rough acoustic plaster, or perforated acoustic tiles.
•
Hanging heavy, pleated fabric curtains on doors and windows.
•
Laying thick carpets on floors.
•
Using upholstered seats with high sound-absorption properties (with audience clothing also contributing significantly to absorption).
📌 Exercises (Q14 - Numerical) ✓ 100/100 Step Marks Format

A submarine emits a sonar pulse, which returns from an underwater cliff in 1.02 s. If the speed of sound in salt water is 1531 m/s, how far away is the cliff?

✓ Step-by-Step Textbook Solution
Given:
•
Time taken for SONAR pulse round trip (t) = 1.02 s
•
Speed of sound in salt water (v) = 1531 m/s

Principle (SONAR):

The ultrasonic signal travels to the underwater cliff and returns back to the submarine's detector, traversing twice the distance (2d).

Formula:

Distance (d) = (v × t) / 2

Calculation:

d = (1531 × 1.02) / 2

d = 1531 × 0.51

d = 780.81 m

✅ Final Answer / Conclusion: The underwater cliff is 780.81 m away from the submarine.
Chapter 12 Biology 10 Complete Solutions

12. Improvement in Food Resources

Sustainable agriculture, crop variety improvement (hybridization & GM crops), crop production management (nutrients, manure vs fertilizers, irrigation, mixed cropping, intercropping, crop rotation), crop protection (weeds, pests, storage), animal husbandry (cattle, poultry, composite fish culture, apiculture).

📘 Chapter 12: Improvement in Food Resources Quick Revision Sheet
View Key Concepts, Formulas & Diagrams ▾
📊 16 Essential Plant Nutrients (Macro & Micronutrients)
Air & Water (3) • Carbon (C) [Air] • Oxygen (O) [Air/Water] • Hydrogen (H) [Water] Free natural sources Macronutrients (6) (Required in large amounts) • Nitrogen (N), Phosphorus (P) • Potassium (K), Calcium (Ca) • Magnesium (Mg), Sulphur (S) Supplied via NPK Fertilizers Micronutrients (7) (Required in trace amounts) • Iron (Fe), Manganese (Mn) • Boron (B), Zinc (Zn) • Copper (Cu), Molybdenum (Mo) • Chlorine (Cl)
NCERT Table 12.1: Division of the 16 essential plant nutrients supplied by air, water, and soil.
Crop Improvement Approaches
1. Crop Variety Improvement: Higher yield, improved quality, biotic resistance (insects, nematodes, fungi) & abiotic resistance (drought, salinity, frost), wider adaptability, desirable agronomic traits (dwarfness in cereals, tallness in fodder). Methods: Hybridization & Genetic Modification. 2. Crop Production Management: Nutrient management, Irrigation, Cropping patterns. 3. Crop Protection Management: Controlling weeds, pests, diseases, and post-harvest storage losses.
16 Essential Plant Nutrients
• Air supplies: Carbon (C), Oxygen (O) [2 nutrients]. • Water supplies: Hydrogen (H), Oxygen (O) [2 nutrients]. • Soil supplies 13 nutrients: - Macronutrients (required in large quantities): Nitrogen (N), Phosphorus (P), Potassium (K), Calcium (Ca), Magnesium (Mg), Sulphur (S) [6 nutrients]. - Micronutrients (required in minute quantities): Iron (Fe), Manganese (Mn), Boron (B), Zinc (Zn), Copper (Cu), Molybdenum (Mo), Chlorine (Cl) [7 nutrients].
Manure vs Fertilizers
• Manure: Natural organic matter from decomposed animal excreta and plant waste. Enriches soil with organic matter/humus, improves water holding capacity of sandy soils and aeration in clayey soils, slow nutrient release, eco-friendly. Types: Compost, Vermicompost, Green manure. • Fertilizers: Commercially manufactured inorganic chemical salts rich in specific NPK nutrients. High immediate yield, highly soluble, but excessive use destroys soil fertility and causes water pollution/eutrophication.
Cropping Patterns
• Mixed Cropping: Growing two or more crops simultaneously on the same piece of land without definite row pattern (e.g., Wheat + Gram, Groundnut + Sunflower). Insurance against complete crop failure. • Intercropping: Growing two or more crops simultaneously in a definite pattern (alternate rows, e.g., Soybean + Maize, Bajra + Cowpea). Prevents pests/diseases from spreading across all rows, optimal nutrient utilization. • Crop Rotation: Growing different crops sequentially on pre-planned land (e.g., cereal followed by leguminous crop like pulses to fix atmospheric nitrogen via Rhizobium).
Animal Husbandry Practices
• Cattle Farming: Milch (dairy milk) vs Draught (agricultural labour) animals. Exotic breeds (Jersey, Brown Swiss for high lactation) crossed with Indigenous breeds (Red Sindhi, Sahiwal for disease resistance). • Poultry: Layers (egg production) vs Broilers (meat production, protein-vitamin rich feed, fast growth). • Composite Fish Culture: Polyculture in single pond using surface feeders (Catla), column feeders (Rohu), bottom feeders (Mrigal, Common Carp), and weed feeders (Grass Carp) - zero food competition, maximum yield. • Apiculture (Bee-keeping): Indigenous bees (Apis cerana indica, Apis dorsata) and Italian bee (Apis mellifera - gentle, stings less, high honey collection, stays longer in hive). Pasturage flowers determine taste and quality of honey.
🎯 Rohit Sir's Concept Breakdown: Composite fish culture me 5-6 alag-alag species ek hi pond me isliye rakhte hain kyunki unke feeding zones alag hote hain: Catla surface par khati hai, Rohu middle me, Mrigal bottom me aur Grass carp weeds khati hai! Isse unke beech food competition ZERO hota hai!
⚠️ Common Exam Trap Radar: Examiner's trap: 'Name the macronutrients supplied by soil' - Total 6 hain: Nitrogen, Phosphorus, Potassium, Calcium, Magnesium, Sulphur (NPK-Ca-Mg-S). Baki 7 micronutrients hain!
⚡ Topper's Quick Calculation / Memory Trick: Remember the Italian Bee name for 1-mark question: Apis mellifera! Layers are for eggs, Broilers are for meat!
📌 In-Text (Page 139) ✓ 100/100 Step Marks Format

What do we get from cereals, pulses, fruits and vegetables?

✓ Step-by-Step Textbook Solution
1.
Cereals (e.g., Wheat, Rice, Maize, Millets, Sorghum):
•
Primary source of Carbohydrates for providing energy required for daily metabolic activities.
2.
Pulses / Legumes (e.g., Gram/chana, Pea/matar, Lentil/masoor, Pigeon pea/arhar, Urad, Moong):
•
Major source of Proteins essential for body growth, tissue repair, and enzyme synthesis.
3.
Fruits and Vegetables:
•
Rich sources of essential Vitamins, Minerals, and Dietary Roughage/Fibre.
•
They also supply small amounts of carbohydrates, proteins, and essential organic acids for boosting immunity and metabolic regulation.

(Note: Oilseeds like mustard, groundnut, and soybean supply healthy Fats/Lipids).

📌 In-Text (Page 140) ✓ 100/100 Step Marks Format

How do biotic and abiotic factors affect crop production?

✓ Step-by-Step Textbook Solution

Biotic and abiotic factors can severely reduce crop yield and quality:

1.
Biotic Factors (Living organisms):
•
Pests and Insects: Chew crops, suck plant sap, and bore into stems and grains, damaging plant tissue.
•
Plant Pathogens: Fungi, bacteria, and viruses cause devastating diseases (rust, blight, wilt).
•
Nematodes and Weeds: Compete aggressively with crops for soil nutrients, sunlight, and water.
2.
Abiotic Factors (Non-living environmental stresses):
•
Drought and Water scarcity: Inadequate rainfall halts photosynthesis and causes plant wilting.
•
Salinity and Waterlogging: High soil salt content or excess water causes root asphyxiation.
•
Extreme Temperatures (Heat, Cold, Frost): Disrupt flower development, grain filling, and seed germination.
3.
Consequences:
•
Massive drop in crop yield, loss of grain weight, poor germination quality, discolouration of produce, and huge financial losses for farmers.
📌 In-Text (Page 140) ✓ 100/100 Step Marks Format

What are the desirable agronomic characteristics for crop improvements?

✓ Step-by-Step Textbook Solution

The desirable agronomic characteristics depend on the specific economic purpose of the crop:

1.
For Cereal Crops (e.g., Wheat, Rice):
•
Dwarfness (short plant height) is highly desirable because dwarf varieties consume fewer soil nutrients for vegetative growth, resist lodging (falling over during strong winds), and produce larger, fuller grain heads.
2.
For Fodder Crops (e.g., Berseem, Oats, Sudan grass used for livestock feed):
•
Tallness and profuse (dense) branching are highly desirable to maximize the total green vegetative biomass yield per hectare for feeding cattle.
3.
Developing varieties with these specific traits optimizes nutrient utilization and dramatically increases economic farm output.
📌 In-Text (Page 142) ✓ 100/100 Step Marks Format

What are macro-nutrients and why are they called macro-nutrients?

✓ Step-by-Step Textbook Solution
📊 16 Essential Plant Nutrients (Macro & Micronutrients)
Air & Water (3) • Carbon (C) [Air] • Oxygen (O) [Air/Water] • Hydrogen (H) [Water] Free natural sources Macronutrients (6) (Required in large amounts) • Nitrogen (N), Phosphorus (P) • Potassium (K), Calcium (Ca) • Magnesium (Mg), Sulphur (S) Supplied via NPK Fertilizers Micronutrients (7) (Required in trace amounts) • Iron (Fe), Manganese (Mn) • Boron (B), Zinc (Zn) • Copper (Cu), Molybdenum (Mo) • Chlorine (Cl)
NCERT Table 12.1: Division of the 16 essential plant nutrients supplied by air, water, and soil.
1.
Definition: Macronutrients are essential plant mineral nutrients that are required by plants in relatively large (macro) quantities for their normal growth, metabolism, and development.
2.
Six Soil Macronutrients:
•
Nitrogen (N), Phosphorus (P), Potassium (K), Calcium (Ca), Magnesium (Mg), and Sulphur (S).

(In addition, Carbon, Hydrogen, and Oxygen obtained from air and water are also consumed in massive amounts).

3.
Why they are called 'Macro':
•
They form the fundamental structural backbone of plant protoplasm, cell walls, nucleic acids (DNA/RNA), proteins, chlorophyll, and ATP. Hence, plants require them in large amounts (concentrations > 10 mg/g of dry matter).
📌 In-Text (Page 142) ✓ 100/100 Step Marks Format

How do plants get nutrients?

✓ Step-by-Step Textbook Solution

Plants absorb a total of 16 essential nutrients from three natural sources:

1.
From Air (2 nutrients):
•
Carbon (as Carbon dioxide, CO₂) and Oxygen (O₂) absorbed through microscopic leaf stomata during photosynthesis and respiration.
2.
From Water (2 nutrients):
•
Hydrogen (H) and Oxygen (O) absorbed by root hairs from soil water (H₂O).
3.
From Soil (13 nutrients):
•
Absorbed as dissolved inorganic ions by root hairs through active and passive root absorption:
•
Macronutrients (6): Nitrogen, Phosphorus, Potassium, Calcium, Magnesium, Sulphur.
•
Micronutrients (7): Iron, Manganese, Boron, Zinc, Copper, Molybdenum, Chlorine.
📌 In-Text (Page 143) ✓ 100/100 Step Marks Format

Compare the use of manure and fertilizers in maintaining soil fertility.

✓ Step-by-Step Textbook Solution

Comparison of Manure and Fertilizers for Soil Fertility:

1.
Origin & Composition:
•
Manure: Natural organic material prepared by decomposition of animal dung, urine, and plant residues; rich in organic matter (humus).
•
Fertilizers: Commercially manufactured inorganic chemical salts rich in specific concentrated plant nutrients (N, P, K).
2.
Effect on Soil Physical Structure:
•
Manure: Immensely enhances soil texture, increases humus content, improves water retention in sandy soils, and facilitates drainage and aeration in heavy clayey soils.
•
Fertilizers: Do not add any organic humus; continuous and excessive use breaks down soil crumb structure, making it hard and compact.
3.
Long-term Impact on Soil Microorganisms:
•
Manure: Nourishes beneficial soil microbes and earthworms, sustaining healthy biological soil ecosystems.
•
Fertilizers: High chemical salts kill beneficial soil bacteria and earthworms, causing long-term acidification or alkalization of soil.
4.
Nutrient Availability & Runoff:
•
Manure: Nutrients released slowly over months; zero environmental pollution.
•
Fertilizers: Highly soluble and instantly absorbed; excess washes into water bodies causing severe eutrophication.
📌 In-Text (Page 144) ✓ 100/100 Step Marks Format

Which of the following conditions will give the most benefits? Why? (a) Farmers use high quality seeds, do not adopt irrigation or use fertilizers. (b) Farmers use ordinary seeds, adopt irrigation and use fertilizer. (c) Farmers use quality seeds, adopt irrigation, use fertilizer and use crop protection measures.

✓ Step-by-Step Textbook Solution

Condition (c) will give the maximum benefits.

Reasons:

1.
High-yielding certified quality seeds provide the highest genetic potential for high yield, disease resistance, and quality grain.
2.
However, high-yielding hybrid varieties have high water and nutrient demands. Adopting assured timely irrigation ensures regular water supply during critical flowering and grain-filling stages.
3.
Adequate, balanced application of fertilizers provides essential NPK macronutrients required for vigorous growth.
4.
Integrating crop protection measures (weed management, insect-pest control, biocontrol) ensures that the high potential harvest is not decimated by pests or weeds.
5.
Only when all four components—Quality Seeds + Irrigation + Balanced Fertilizers + Crop Protection—operate synchronously in an integrated package does the farmer achieve maximum yield and profit.
📌 In-Text (Page 146) ✓ 100/100 Step Marks Format

Why should preventive measures and biological control methods be preferred for protecting crops?

✓ Step-by-Step Textbook Solution

Preventive measures (proper seed bed preparation, timely crop sowing, intercropping, crop rotation) and biological control methods (using natural predators like ladybird beetles against aphids) should be strongly preferred over synthetic chemical pesticides because:

1.
Eco-friendly & Non-Toxic: Chemical pesticides are non-biodegradable, toxic, and wash into ground and surface water, polluting local drinking water resources.
2.
Prevents Bio-magnification: Toxic agrochemicals enter the food chain and concentrate progressively at higher trophic levels (Bio-magnification), causing severe neurological and carcinogenic illnesses in humans and birds.
3.
Protects Beneficial Organisms: Synthetic chemicals kill beneficial pollinating bees and soil earthworms, while biological control targets only the specific pest.
4.
Prevents Pest Resistance: Overuse of chemicals leads to the rapid evolution of pesticide-resistant 'super-pests', whereas biological control maintains natural ecological balance sustainably and economically.
📌 In-Text (Page 148) ✓ 100/100 Step Marks Format

What are the advantages of composite fish culture?

✓ Step-by-Step Textbook Solution

Composite fish culture is an intensive polyculture system in which 5 or 6 compatible fish species (combination of indigenous and exotic breeds) are cultivated together in a single freshwater pond. Its major advantages are:

1.
Zero Food Competition (Ecological Niche Differentiation):
•
The selected fish species have completely different natural feeding habits and occupy different vertical zones of the pond:
•
Catla: Surface feeder (feeds on surface zooplankton).
•
Rohu: Column feeder (feeds in the middle zone).
•
Mrigal and Common Carp: Bottom feeders (scavenge on detritus and bottom vegetation).
•
Grass Carp: Weed feeder (consumes aquatic weeds).
2.
Complete Utilization of Pond Food Resources: All natural food available across every layer of the pond is consumed efficiently without waste.
3.
Exponentially Higher Fish Yield: Yield per unit pond area is dramatically higher than monoculture (farming single fish species).
4.
High Economic Profit for farmers with optimum resource utilization.
📌 In-Text (Page 148) ✓ 100/100 Step Marks Format

What are the desirable characters of bee varieties suitable for honey production?

✓ Step-by-Step Textbook Solution

The desirable characters of honeybee varieties (such as the Italian bee, *Apis mellifera*) suitable for commercial apiculture are:

1.
High Honey Collection Capacity: The bees must be industrious and capable of harvesting large volumes of nectar and pollen.
2.
Gentle Nature (Stings Less): They should have a mild, docile temperament and sting less, allowing easy handling by beekeepers.
3.
Longer Hive Tenacity: They must stay and work inside the given artificial beehive for extended periods and should not abscond or abandon the hive easily.
4.
High Prolific Breeding: The queen bee should lay large clutches of eggs to rapidly expand colony workforce.
5.
Strong Disease Resistance: The colony should naturally resist common brood diseases and mite pests.

Frequently Asked Questions (Class 9 Science)

Common queries about the NCERT Class 9 Science 2026–27 syllabus and exam preparation

Are these Class 9 Science NCERT solutions based on the latest 2026-27 rationalised syllabus?
Yes, 100%. These solutions cover all 12 rationalised chapters across Physics, Chemistry, and Biology strictly as per the latest NCERT 2026-27 textbook and CBSE NEP 2020 guidelines, eliminating all deleted syllabus portions.
Do these solutions include all official NCERT diagrams, charts, and graphs?
Yes! All official NCERT diagrams (Plant vs Animal Cell, Neuron, Bohr's Atomic Orbitals, Velocity-Time Graphs, State Interconversion Triangle, Sound Waves, and Human Ear anatomy) are included in high-definition responsive vector SVG format.
How do these solutions ensure 100% step marks in CBSE school exams?
Every single question is structured in official CBSE step-marking format: Given, To Find, Formula, Step-by-Step Calculation with SI units, Balanced Chemical Equations, Labeled Diagrams, and Boxed Final Answers to ensure full step marks.
Where can I find Class 9 Ganita Manjari Math solutions?
You can access complete, ad-free step-by-step Class 9 Ganita Manjari Math solutions on our official sister portal: https://unnatailearning.com/ganita-manjari-class-9-math-solutions.
Where is Unnat Tuition Center located?
Unnat Tuition Center is located at Didar Nagar / Shanti Nagar, Kurukshetra, Haryana 136118 (Helpline: +91 83072-64895), mentored personally by Rohit Sir.
🚀 Unnat Pedagogical Platform: 📱 100+ Screen Super-App & 3D STEM Labs • 📥 Download Android APK (177 MB)